Roland AIRA Compact 2 Tier Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2 Tier stand for Roland AIRA Compact Series
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 473
- Wydruki
- 3
- Wyświetlenia
- 3003
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Standard Digital File License
Hey everyone,
YVR3DPrints here with a 2 tier stand model for the new Roland AIRA Compact series instruments. This was a fun project and wanted to build something for me and my kid to both play at the same time without getting too much in each other's way.
The model will require some sort of wood backing for everything to act as one unit. I wanted a desktop mount that required minimal setup and teardown time.
The bottom units' On/Off switch, USB-C and Midi In/Out jacks should be accessible as long as your backing is not too thick.
The backing pieces I used were 160mm wide x 63mm tall x 18mm deep.
I printed this out in PETG at 0.3mm layer height with 4 bottom & top layers, 4 perimeters for vertical shells and 5% gyroid infill.
Feel free to buy me a coffee if you like this.
https://buymeacoffee.com/yvr3dprints