Liczymy pasujące modele…
Made for a friend who had two Behringer synthesizers he wanted stacked on top of each other. Uncertain if the hole pattern works for other models but taken from the Behringer Model D. Made to replace the side cover and use the original…
Wydruk około 8,65 €–10,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
22 Degree Stand for Make Noise, Erica Synths, ALM, or other single row skiff / cases Deep in the depths of the Megalopolis' is where the finest music is born. Status, upper level personages, mutant, or freak, synth music is made by all.…
Wydruk około 5,67 €–6,93 € nettoWstępna wycena jednego wariantu
With a Curved back and shortened overall length. 22 Degree Stand for Make Noise, Erica Synths, ALM, or other single row skiff / cases. Making music is much simpler with your Euroracks single-row cases at a splendid 22.5 degrees. No…
Wydruk około 4,84 €–5,92 € nettoWstępna wycena jednego wariantu
Simplified version of my Synth Mask model. This version can be made without vacuum forming the visor and will work with cut plastic panels for the vision. The model fits on a print bed with a 300x300x400mm bed size. I sliced it for easier…
I designed this case for my Zynthian project. The electronics is partly derived from the V5 with an illuminated and 3D printed button matrix. The needed circuit information is on the Zynthian forum and github pages. I handwired it…
In this project we'll show you how we built a mini synthesizer with capacitive touch using Circuit Playground Express and MakeCode. Click for links and resources! Learn guide, files and more!…
The pico_test_synth pcb was originally designed to be held up by four M2.5 standoffs and screws, but I wanted a simple little case that was easy to snap on and off. This case has two tabs that will hold the qtpy_synth PCB well enough but…
I wanted to see if I could make complex structures in Structure Synth. More complex than boxes & spheres anyway. Turn out it is possible but it requires a lot of triangles. These should be printable without supports but the models should…
The qtpy_synth pcb was originally designed to be held up by four M2.5 standoffs and screws, but I wanted a simple little case that was easy to snap on and off. This case has two tabs that will hold the qtpy_synth PCB well enough but allow…
I designed a small stand for the Waldorf Streichfett/Rocket synth modlue to be put ontop of another synthesizer.
Wall Mount for the Gecho Loopsynth. Affix with 3M strips.
When I first saw the Solarpunk Synthesizer kit , it was clear that I just had to have one ;-) I created an enclosure which, ahem, encloses all parts for storing, and can also act as stand for the solar panel. The lid contains spacers so…
Some time ago I've build a simple cigarbox synth out of a famous german MAKER magazine ... . But I don't want to use a simple cigarbox as enclosure. So I've created this. The printing was done with "glow in the dark" red PLA and mint…
A 3D printable Synth mask. The design has been nearly finalised, however it will still be updated.
I designed a small stand for the Waldorf Streichfett/Rocket synth modlue to be put ontop of another synthesizer.
My list of components: Gemfan-hélice de 3 aspas Hurricane 3525, M5 y t-mount para Drones FPV Freestyle de 3,5 pulgadas, 3,5x2,5x3, 6/10 pares - AliExpress 26 Antena RUSHFPV Cherry FPV/antena VTX | 5,8G LHCP/RHCP | largo alcance para…
Some time ago I've build a simple cigarbox synth out of a famous german MAKER magazine ... . But I don't want to use a simple cigarbox as enclosure. So I've created this. The printing was done with "glow in the dark" red PLA and mint…
Fits SynthRacks 84HP EuroRack Rails using the M5 csk bolts they supply.
Note: these ears take up 4.5 rack U.
I didn't find a nice synth rack, so I made my own. Fits 2x 3U synthesizers. Screwholes are 4mm. Printed in Sunlu PETG CF black for the aesthetic, 4 outer walls and 10% infill. Model for right part. Flip fol Left . Still a V1 so might add…
When moving some Eurorack gear into a 19" server style rack, I noticed the 84hp frames that were supposed to fit left ~4hp in wasted space on the sides. So I bought some 104hp Synthrotek rails and cut them down to 17 ⅝" (88hp) to give…
This is a 3D-printable stand for the Tempera synthesizer . It consists of two parts which attach to the VESA mounting holes on the bottom side and can be customized in OpenSCAD . BOM Components used for one part (two needed in total): 2×…
due to your printer settings, you have to scale the model a few % up or down.
Cet objet est un clip de sangle de synthétiseur Behringer qui se fixe avec deux vis de 3 mm de diamètre. La pièce est à fabriquer avec : Qualité d'impression : 0.2 Vitesse Filament : N'importe quel filament Imprimante : N'importe quelle…
This was for a friend and wanted to retain some of the stock parts functionality. He said it works great with the 2 additions listed above. Printed in ASA. 3mf and .step file will be provided if you wish to edit it. Not sure why the step…
This Summer, our intern Evan decided to create a Raspberry Pi MIDI Controller and Synthesizer. He created this case to imitate the look of a piano. Full details on this project can be found at Maker.io or at the link below. AGM Summer…
This is a case for the Chaos NAND handheld synthesizer from Synthrotek. https://www.synthrotek.com/products/lo-fi-synthesizer-circuits/4093-chaos-nand-handheld/ You will need to split the lid from the bottom with your slicer, I couldn't…
A pocket version of the game Photosynthesis. The game pieces are designed to contain a disc magnet in the base (6mm diameter, 3mm height), so they can latch onto a metal game board. The pieces are tiny and can be a bit finicky to print,…
3 different designs. The two models that have multiple arms have a slightly updated profile that should hold cables more securely, while also holding more cables per arm. They also have a back plate that slides on to help the clip stay in…
This is a dust / protective cover for the Tempera synthesizer. This is designed to slide easily onto the Tempera without blocking the ports on back or touching the knobs, sitting on the outside edge of the case. Depending on how well your…
This model requires an LED strip for installation. It enhances the aesthetics and visibility of your synthesizer, making it perfect for low-light environments.
Drones are a perfect playground for lightweight yet robust designs, and Synthara takes full advantage of cutting-edge generative design techniques. This 3D-printed drone frame is engineered for FPV enthusiasts looking for a balance…
Printed in TPU For the Project Synthara
You can download the Synthara frame here: https://www.printables.com/model/1216454-project-synthara-generative-design-fpv-drone-frame
Print the model from bottom to top using the following colors: Purple Black Yellow Hot red
Molecular surface representation of the bovine mitochondrial ATP synthase state 1b PDBID 5ARE. The chains were grouped and printed so that the main structural components are visible: F0 in green; F1 in blue; axle in red and stator in…
FIRST READ THIS! This is a lifter to stack anything you want, see photos… I made this for my dad who is a DJ so it is actually made for synths and other DJ stuf, but you can use it far other things to… P.s. you should look at the 3d…
The default height of 35mm is designed to fit directly above a Arturia Keystep (see pictures).
This stand was designed for the Waldorf Streichfett, Rocket and 2-pole synthesizer, holding them in a 45° angle. It can be printed easily without support. I can be printed easily laying on the side without any support.
This model of ATP Synthase (ATPase) lets students explore how a proton concentration gradient is used to store energy in the form of ATP. Protons are placed into the protein through the hole on the topside of the membrane. The protons…
I wanted to prop my plinky up, so I hacked this thing together. enjoy! Print top side on the bed, tree supports slim critical areas only, 15% gyroid works fine, print at 100% infill for a great weighted solid feel
This is a 3D enclosure for XIAO MIDI Synthesizer. The XIAO MIDI Synthesizer is an open-source innovative device that transforms MIDI signals into beautiful music. Powered by XIAO ESP32-C3 and the SAM2695 MIDI chip, this compact gadget…
Desktop rack for behringer desktop synths, such as pro-1 and pro-800. Supports 2-3 synths, maybe a forth? Uses 8 m4 screws in 25mm length to assemble (for two synths). You will need 16 m3 20mm screws to replace the screws used in the…
I made a photosynthesis equation for my allotment, just to remind me how it all works. The font is Montserrat. The sun is an original design.
Simple shell for the 4 synths by Spherical Sound Society that all share the same PCB footprint. Allows a little more protection to the soldering along with some peace of mind during sonic exploration. Printed with PLA
A 3D printable Synth mask. The design has been nearly finalised, however it will still be updated.
A bracket to mount a Behringer Model-D or Toro to the top of the Roland PK5 or PK5A pedals. This is one side bracket, so simply mirror for the other. The screw slots are big enough to clear the screw heads on the top of the pedals, and…
Here's a cable holder for modular synth that has a bit of a lip to hold the cables from falling out, as well having strong structural support. Prints as two pieces in order to have the features be as strong as they can be. Print Settings…
Here is the base of the face mask that can be use with a synth head but it is still a prototype Here is the base of the face mask that can be use with a synth head but it is still a prototype. There is no lower jaw holder made yet. Also…
Thanks for checking out my Ntron build! This one is special — an all-in-one retro project that combines 8-bit gaming with chiptune music. It’s packed with fun design choices and plenty of room for customization. You can go simple and get…
Please heard and download the model if you like it! This plug covers up your fairlead opening so debris does not impact itself into the synthetic rope and cause it to break prematurely. This will hopefully also keep any water out of that…
This model can be adjusted to any rectangular synth size, as long as it fits your print bed. You can also adjust various other parameters to fit it to your needs. If you really want to go fast, you can even print this in spiral vase mode…
3D gedrucktes Gehäuse für den Behringer 2600, ARP 2600 clone im Vintage design. Die obere Gehäuseabdeckung wird mit 4 Schrauben an den seitlichen Wänden verschraubt. Der Korg SQ-1 Sequenzer Gehäuseaufsatz wird mit 2 Schrauben auf der…
SynthTruss – Modularer Truss-Stand (Open Source) Dieser modulare Mini-Truss-Stand ist ein vielseitiges 3D-gedrucktes Gerüstsystem, inspiriert von echten Bühnen- und Event-Truss-Konstruktionen. Ursprünglich als kompakter…
This is work in progress! The clearances are a bit tight for the TRS-plugs and also it only works with angleded connectors. I had to open the holes a bit. The parts are glued with some CA, I could not find a solution to use fasteners and…
Case for Division 6 - Business Card Synthesizer made from two pieces that hold together without screws. Bottom piece functions as a base into which you slide the top part of this case. You don't need any screews but i is possible that…
My list of components: Gemfan-hélice de 3 aspas Hurricane 3525, M5 y t-mount para Drones FPV Freestyle de 3,5 pulgadas, 3,5x2,5x3, 6/10 pares - AliExpress 26 Antena RUSHFPV Cherry FPV/antena VTX | 5,8G LHCP/RHCP | largo alcance para…
It's It's an easily printable, slightly elevated 45 degree desk stand for the Synthstrom Deluge groovebox. I made my own design because the existing designs didn't fit on my Prusa Mini. I printed it using Gembird PLA, 0.15 layer height…
It's a low profile and simplified version of my previous Deluge stand as the other version sometimes blocked a part of my monitor when I plugged in cables. It's also printable on the Prusa Mini. I printed this one using 0.6 mm nozzle,…
Fits SynthRacks 84HP EuroRack Rails using the M5 csk bolts they supply.
This is a case for my Arduino Synthesizer project that accommodates for a 128x64 OLED, 8Ω speaker, IR receiver, and ports found on the Arduino Mega 2560. It is it also fit for that same microcontroller.
Note: these ears take up 4.5 rack U.
I didn't find a nice synth rack, so I made my own. Fits 2x 3U synthesizers. Screwholes are 4mm. Printed in Sunlu PETG CF black for the aesthetic, 4 outer walls and 10% infill. Model for right part. Flip fol Left . Still a V1 so might add…
A rack large enough to fit 3 Behringer-style desktop synth modules. I designed this at the request of a friend who was rapidly running out of desk space, based on some existing designs found online. This will fit any 3 modules of equal…
you will need to enable supports and you will also need to color it in the slicer.
you will have to color paint this in the slicer if you want it to look realistic when you print it.
This model allows you to mount a Roland AIRA Compact synth into a Eurorack case. There is only 8mm space at the rear of the synth, so you will need to use compact right-angled connectors there if you want to use the TRS MIDI or USB-C…
A sturdy 25° mount for the Runcam Thumb Pro to fit the synthara frame
Kleiner Gurthalter für den Yamaha Synthesizer CS 01. Davon werden je Instrument 2x gebraucht. Eines links, das anderes rechts angeschraubt. Mit PLA+ oder PETG oder ABS ausgedruckt, hält es fest wie das original (das aus Metall ist). -Man…
The Arduino UNO Q DIY synth bundle is a an all-in-one Arduino bundle that lets users build and control their own modular synth using Pure Data and intuitive physical inputs. You can buy your own bundle in the official Arduino store or…
Per Albero di Natale sintetico con tubo centrale del diametro di 33 millimeti, innesto per sei rami. stampato in PLA con infill 20% - For synthetic Christmas tree with a central tube with a diameter of 33 mm, with a six-branch connection.…
Using 4 linear Softpot potentiometers from spectra symbol, a 5in Action brand CRT with a black and white video port input, an Arduino Mega 2560, a low pass filter, and a .96in OLED screen, PWM waveforms are modified with DSP effects using…
Synthea, a highly detailed anime inspired cyber warrior girl featuring futuristic armor, mechanical details, and a dynamic standing pose. Designed for display, painting, or sci fi collections, this model combines sleek cyberpunk…
Designed for my home studio, great way to keep cables organised and accesable. Printed mine in PLA, not much flex and has survived well thus far.
3D print to hold the SSD1306 tiny display for the Synthux Touch 2
# Figura Chica Synthwave / Retro-Futurista Esta es una hermosa figura tridimensional inspirada en la vibrante estética retro-futurista y synthwave de los años 80, ideal para decorar tu espacio geek o complementar tus colecciones de…
Not affiliated: https://www.cutlasses.co.uk/tech/build-a-daisydrone/ But I built the drone synth and made this case for it. https://youtu.be/_0Ykc3huzv0 to watch demo. DaisyDrone is a drone synth, with 6 sliders, Inspired by @hainbach101…
Connects to a tripod, has a gap to slide in a Eurorack modular synth cable holder. I figure to use superglue or hotglue to attach the fr4 holder to the tripod adapter. I left room above for the thread, you may want to adjust tripod_h…
One-piece cover to protect your 1010Music Nanobox Lemondrop synth . Or indeed your Fireball… but if you use it for that, sorry for the Lemondrop word embossed into it. It clips over the top and is held in place by little clip shapes at…
Teenage Engineering OP-Z synthesizer and sequencer is a small beast for musicians. As it's a quite valuable thing, I designed this very simple case for all of fans with 3D printer somewhere around. I recommend the top cover (lid) to be 3D…
Simple case for https://github.com/holmesrichards/cabletester Designed to fit the 0.96" screens available cheaply from the usual suspects. Needs 4 M3x5mm to hold down the board, the holes are the right size but will need to be tapped by…
A case design I have used for a couple of home made synthesizers I have build. The side panels and internal support brackets are 3D printed with laser cut bottom, top, front, and rear panels. It can be easily modified for width if you…
The model fits on a print bed with a 300x300x400mm bed size. I sliced it for easier printing and created pegs and slots for easier assembly. It features an articulated jaw, electronics panels and a vaccumform mold for the visor. The visor…
My very first thing! This is a parametric stand for the Arturia Microfreak synth. To change parameters just download the f3d file from https://github.com/tianmarin/mf_stand and open it on Fusion 360. Go to Modify > Change Parameters and…
Part List Part Quantity Link 6x2mm 12 Amazon This is a gridfinity holder for a synthesis brush. The brush is also called a Barber Brush. It's a brush of many uses. The holder has a rectangular cutout of 32 by 102 millimeters. Gridfinity…
The POLY555 is a polyphonic , analog, square wave synth based on the 555 timer chip. Polyphonic: Multiple notes can be played simultaneously. This is opposed to "monophonic," where only one note at a time can be played. Analog: There…
This is a "skiff" rack case for Eurorack modular synthesizers. The case is made from 1/4" (6mm) plywood and TipTop Z-Rails w/ bracket . The EPS cut files are for a 104hp wide case with an inner depth of 60mm. The included Fusion 360 CAD…
Sometimes when you're making music or killing mutant aliens far off in the Science Fiction future, you just need a steady tilted surface to work with your equipment on! Behold the Analog Synth Stand! Three models: Large (used on Behringer…
This is a stand design for the Squarp Hapax. You'll need to print two of them. The cutout with the holes is so you can mount a divider of wood etc. if you wish to do so. I added a cross beam if you want to print and use that.
This is an easy-to-print Synthesizer Stand for “Make Noise,” “East Beast,” and “West Pest” type Synths. Will support Synths around 228.6MM X 139.7MM or 9 inches x 5.5 inches Places the Synth on a comfortable 5 degree slope No support…
This is an easy-to-print Synthesizer Stand for LYRA-8 Organismic Synthesizer Will support the LYRA-8 Organismic Synthesizer or Synthesizers around 266.7MM X 266.7MM or 10.5 inches x 10.5 inches Places the Synth on a comfortable 5 degree…
This is a patch cable / USB cable holder. I use it on a plywood deck where my synthesizers are crowding along with my science fiction models. A support enforcer is needed No gluing Easy to print Designed on Tinkercad. Enjoy!…
Note: just publishing the STL files (this is not my work). Full credits to the designers and creative minds behind this project. Feel free to join the Discord server and discuss/share your thoughts and builds. I found these on…
A short geometric vase made in StructureSynth, inspired by Maker's Muse video; https://www.youtube.com/watch?v=1VHV--A9x Use Vasemode (spiral vase perimeter) , scales nicely
This is a simple model allowing me to “hook” the lovely deluge front and center on the piano and use the midi feature of the standing piano (Yamaha) as input. A 3mm layer of felt was attached to the hooks in order to prevent scratching of…
