1 / 2
Case for pico_test_synth CircuitPython synthesizer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for pico_test_synth that can be snapped in or secured with M2.5 screws
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
The pico_test_synth pcb was originally designed to be held up by four M2.5 standoffs and screws, but I wanted a simple little case that was easy to snap on and off. This case has two tabs that will hold the qtpy_synth PCB well enough but allow you to pull it out without much effort. If you want a more secure attachment, you can still use M2.5 screws and nuts.
You can also get the "OLED standoff brace" from “qtpy_synth case” to optionally print to help hold up the OLED display.