1 / 3
Roland FP-30X table top tablet stands — zdjęcie 1
1 / 3

Roland FP-30X table top tablet stands

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A solution to put your laptop, midi controller and extra keyboard on top of the Roland FP-30X Piano.

Ocena
5 / 5
Polubienia
14
Pobrania
116
Wydruki
0
Wyświetlenia
1384
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The curved shape of the FP30-X piano top does not allow to place any item steadily. These stands, glued to a wooden board will attach securely to the piano, providing a flat surface. 
 

Printed on a Prusa MK4 with PLA in draft mode, I then used neoprene glue to assemble the stands to a wooden board 950mm X 240mm - 8mm thick. 

The main challenge was to adjust the position of the points of contact with the piano so the stand is steady with only 2 points of contact with the curve of top of the piano. You will find 3mf and original FreeCAD file (very dirty) to ease your derivative work.

Tagi