1 / 3
Roland DWX-50 Suction Hose Holder - By Denteon LLC
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Solution to the common issue with the DWX-50 where the suction hose detaches itself from the machine during operation.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 469
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
The Roland DWX-50 dental milling machine has a common failure wherein the suction hose comes loose during operation. This 3d printed holder clamps securely onto the suction hose, and uses a pre-existing screw mounting point on the machine to secure the suction hose.
Hardware required:
2X M3 Heat-set brass threaded inserts: Amazon Link
2X M3 35mm Screws, and 1X M3 15mm Screw: Amazon Link
