1 / 5
Roland PA-48 N Key-Hammer for White Keys — zdjęcie 1
1 / 5

Roland PA-48 N Key-Hammer for White Keys

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement for Roland PA-48 N

Ocena
5 / 5
Polubienia
32
Pobrania
1345
Wydruki
4
Wyświetlenia
3835
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Roland PA-48 N Key-Hammer for White Keys

These hammers always break at the same spot. The official spare parts are difficult to get and too expensive. To make your own spare part you need the weight from a hammer. This is easy to break out with pliers. After printing, the support material can be easily broken out with a cutter knife, now just simply place the weight in the sink and glue the two parts together with superglue. Spring clamps are helpful here.

I have tested it only in the RD-600 model but the hammers should still fit these models according to the original manufacturer.
RD-500, RD-600, A-90, HP145, KR370, KR570, XV88, FP-1, FP-8, FP-9 and more

Print instructions

  • Supports everywhere
    • Recommendation: Snug supports with XY separation between an object and its support at 100%
  • print in PETG 
  • 0.15mm layer thickness with 0.4mm Nozzle
  • 100% infill

 

If you like what I am doing please consider buying me a coffee or tipping.

Buy me a coffeeBuy me a coffee

Tagi