1 / 1
Roland FP-30 Piano Power Supply Holder — zdjęcie 1

Roland FP-30 Piano Power Supply Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PSU holder for Roland FP-30 and KSC-70 feet

Ocena
0 / 5
Polubienia
10
Pobrania
57
Wydruki
1
Wyświetlenia
393
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I modified another design to accustom the FP-30 PSU and made a few changes for my needs:

  • the whole design is slightly longer because of the longer PSU
  • it's mirrored, so the mains cable comes out towards the left leg of the piano when mounted
  • I removed the rounded corners of the closed end of the shelf to make it easier to print.

Notes: 

Print the whole thing standing up with the "U"-shaped end of the shelf on the bottom. No supports but a little bridging is required for the top and may lead to a frayed edge but in my case nothing I'd worry about.

Tagi