1 / 4
Stand for Roland Aira Compact series (S-1, T-8, J-6, E-4) — zdjęcie 1
1 / 4

Stand for Roland Aira Compact series (S-1, T-8, J-6, E-4)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Elevated stand so you can place another device bellow it and pass the cables from behind

Ocena
0 / 5
Polubienia
23
Pobrania
198
Wydruki
0
Wyświetlenia
1961
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution

Elevated stand so you can place another device bellow it and pass the cables from behind.

I tweaked the height so it works well with my MIDI keyboard, but will also work when using two Airas together (see pics).

It leaves enough space that you can keep the cables bellow the unit, facilitating a clean setup.

Important: You will need to print the part two times and for best stability you will need three all-thread M3x170mm rods (two may be enough) and 12 M3 nuts/washers.

Tagi