Double Stand for Roland AIRA Compact Units (S-1, T-8, J-6, E-4)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Table stand for 2 Roland AIRA Compact units. Triple arc design.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 107
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Double Stand for Roland AIRA Compact Units (S-1, T-8, etc.)
Platform angles: 25° and 45°
Two versions are provided:
• with hexagonal groove pattern
• plain
Assembly requires three rods to hold the sides together. I used solid aluminium rods. The rods can be glued in place or secured with grub screws and threaded inserts. If using glue, ensure the distance between the sides is correct before the adhesive cures.
Hardware:
3x Ø6mm rods, length 196 mm
optional for screw mounting:
• 6× M4 threaded inserts (M4×8.1mm)
• 6× M4 grub screws (M4×8mm)4x Ø10mm rubber feet, recommended thickness 1.5-3mm.
The six holes on each inner surface are designed for M4×4 threaded inserts, in case something needs to be mounted underneath the units.
I printed this in Matte PLA with 0.4mm nozzle, 0.2mm layer height, 3 perimeters and 5 solid top/bottom layers, 20% cubic infill. No supports. It should also print fine with 0.6mm nozzle and 0.3mm layer height.