Hylian Shield Fidget Slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Fidget Slider with 12 Magnet Slots based on the Hylian Shield.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
I used 5x3mm magnets for this. If you need different sized magnet holes let me know.
I used 20% infill (for a bit more weight) and 0.05 layer height to get the nice details. When printed flat it doesnt need supports however you'll get the smoothest look if you print it at an angle and with the pointy end pointing upwards. I suggest experimentking with the angles first to suit your tastes.
If you struggle with fitting the Magnets, you can use a blowdryer to heat up your shield and then press the magnets in.
The Shield has 12 Holes for 12 Magnets, so for the “Set” youll need 24 magnets.
I’ve included my early versions with 8 Holes for Magnets if thats more your jam.