Qidi Q1 Pro Mothreboard Fan 80mm Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement the small 40mm motherboard fan with 80mm one mounted on the back cover.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 997
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Originally I wanted to print this model but I didn't want to interfere with the motherboard and also my printer is a later version (V2?) so the 40mm motherboard fan is not attached to the side/bottom of the MB but is screwed on the back panel. I also had an 80mm 24V fan at home. So I made a holder for it also on the back cover. The new fan is plugged into the same port as the original.
The model consists of 3 parts:
- fan holder with cover grid
- internal flange
- a template for the cutout of the back panel and the holes for the screws
Printing:
- Creality Hyper PLA
- nozzle 0.4 - standart QIDI settings for line width
- layer hight 0.2
- wall loops 4
- top/bottom layers 4
- infill 15% 3D Honeycomb
- skirt
- support (holder, flange)
BOM
- GDSTIME 80MM Slim Fan DC 24V 2PIN 80mm x 80mm x 15mm Silent Fan Dual Ball XH2.54
- Brass Heat Inserts M3 - 8x
- Hexagon Hex Socket Head Button Allen Bolt Screw M4x20 - 4x
- Hexagon Hex Socket Head Cap Allen Bolt Screw M3x20 - 8x
Tools:
- drill, hand chip saw, files, fine sandpaper