Qidi Q1 Pro Mothreboard Fan 80mm Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement the small 40mm motherboard fan with 80mm one mounted on the back cover.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 129
- Makes
- 1
- Views
- 997
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Originally I wanted to print this model but I didn't want to interfere with the motherboard and also my printer is a later version (V2?) so the 40mm motherboard fan is not attached to the side/bottom of the MB but is screwed on the back panel. I also had an 80mm 24V fan at home. So I made a holder for it also on the back cover. The new fan is plugged into the same port as the original.
The model consists of 3 parts:
- fan holder with cover grid
- internal flange
- a template for the cutout of the back panel and the holes for the screws
Printing:
- Creality Hyper PLA
- nozzle 0.4 - standart QIDI settings for line width
- layer hight 0.2
- wall loops 4
- top/bottom layers 4
- infill 15% 3D Honeycomb
- skirt
- support (holder, flange)
BOM
- GDSTIME 80MM Slim Fan DC 24V 2PIN 80mm x 80mm x 15mm Silent Fan Dual Ball XH2.54
- Brass Heat Inserts M3 - 8x
- Hexagon Hex Socket Head Button Allen Bolt Screw M4x20 - 4x
- Hexagon Hex Socket Head Cap Allen Bolt Screw M3x20 - 8x
Tools:
- drill, hand chip saw, files, fine sandpaper