Yaesu FTM-500DR replacement knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement knob for a Yaesu FTM-500DR mobile VHF/UHF amateur radio
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My FTM-500DR control unit took a tumble and I lost one of the knobs after it popped off. Yaesu didn't respond to support requests so I decided I didn't want to wait and printed my own replacement knob.
I've made two versions of it due to the texture not being as aggressive as the OEM factory knobs. I also did not lose the retaining clip that goes inside the knob.
I've made two versions, one aggressive (more OEM-like) texture, and one standard but still grippy. The standard one prints slightly cleaner. I made two versions of each of those, one if you still have the factory metal sleeve/clip that goes inside the knob and one that is tighter if you no longer have the clip.
In the photos attached, the left knob with the clip below is from the file called “without sleeve”, meaning you do not have a sleeve and need a tighter knob to fit properly. There is no separate printable plastic sleeve, I just incorporated the tighter dimensions of the hole in the file.
Print settings: .25mm nozzle @ .7mm layer height in PETG to be somewhat heat tolerant.