234 modeli
This is a custom 37° tilt stand designed for the Yaesu FTX-1 Field . The stand is only compatible when the SPG-1 Carrying Protector is mounted. The stand is 3D-printed in Prusament PETG Matte Black using a 0.4 mm nozzle. Print settings…
3D printable desk stand for the remote display of a FTM-400 transceiver. This simple desk stand has various features. The front is angled for a good viewing angle. There is a large hole in the back to pass cables through. A square hold on…
please use the supports as provided
Yaesu ft-891 Display protected frontcover. It protects you display form overheating in the sun. The Frontcover fit completely over the display control part. I did not include any logo for theft prevention purpose.
Model designed to mount the Yaesu FTM-500 head unit to the center dashboard pocket of the Jeep JL or the Gladiator. No additional hardware required from Yaesu. See model. Assembly only Requires 2 4mm threaded inserts and 2 4mmx5mm screws…
RAM Ball Mount 25mm / 1 inch M5x20mm Yaesu FTM-500 FTM-400 Etc. I got aggravated when I couldn't find a 25mm ball with an M5x20 screw to hold the remote head of your mobile radio. This should work with the Yaesu FTM-500, 400 and any radio…
Background As an active portable ham radio operator, I am always interested in evolving my gear to support a wide variety of ham radio activities. My primary rig for portable operations is the Yaesu FT-891 and with no internal soundcard…
The CatTouch control-display for Yaesu radios from Catmeters.com is awesome. But I wanted a case that tucked up under the SP-10 Speaker a little better. This is what I came up with. This design is “screwless”. The Boards just snap into…
Dieser Aufsatz für den Tuningknopf des Yaesu FT-817/18 ermöglicht ein rasches Drehen desselben mittels klappbarer Kurbel und optionaler, aufgeklebter Fingermulde. Als Achse für die Klappkurbel ist ein Stück Filament (1,75mm) vorgesehen.
I remixed this case so it could be used with my protected 18650 cells. These cells are a few mm longer than the cells used for the original design. Category: Electronics
My FTM-500DR control unit took a tumble and I lost one of the knobs after it popped off. Yaesu didn't respond to support requests so I decided I didn't want to wait and printed my own replacement knob. I've made two versions of it due to…
I remixed https://www.thingiverse.com/thing:2527434 since I needed to install a different switch, LED and charging connector. I added a bit of thickness so it works ok with PLA Please hit the LIKE button if you download it, that way I get…
I took a while to get the geometry more-or-less matching to replace the bag hook/ash-tray for these trucks. I'm currently using mine to mount a Yaesu FTM-150 dual band amateur radio, but I've included the blank mesh, and step files for…
I decided I needed a good way to get my FTM-300 out of the way on my desk, so I made a mount for it. This is designed to hold the new style mounting cage that Yaesu is using that allows the radio to be released with a single lever. The…
Printed at 0.20mm Standard layer height with 2 walls and 5 base layers to strengthen the bottom.
Side rails for AnyTone AT-D578UV, and Yaesu FTM-400 (probably also FTM-100) Do not use too long of screws, or you may damage or destroy your radio! Side rails are 8mm thick. Rails are tall enough to leave an air gap under the radio. I…
This is a minor change to the great battery holder posted by tandro. I updated it to Accommodate a different fuse holder Deeper wire channels between the positive and negative battery terminals that get connected to allow for the…
All files including design files are on my github (https://github.com/gx1400/3dprint_subaruoutback_consolemount) Be sure to print in PETG to be more temperature tolerant # Changelog 2022-12-13 - Initial Commit ## Design Autocad Fusion 360…
A Universal Mountplate For Yaesu FT-891. Supported mounts are often used as phone holder. You can stick them on the window. Or put it in a cup holder. You can use the original supplied screw to fix it on the FT-891
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
The model comes in two parts. The ‘base’ requires you to pull out the little rubber mat in the console. It has three pins that loosely secure it in place (I didn't want a pin to break and prevent the mat from going back in). The top…
An attempt at a temporary remote head bracket for the Yaesu FTM-500. Yaesu Original Part Number: RA6440200
I too found the stock knob on the FT-60 to be too small. This remix is taller than the original and adds indexing slant.
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…
Desk stand bracket to hold the facia panel of the Yaesu FTM-100D at a 45 degree angle Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 10% Filament: Sunlu PLA+ Black Category: Other
No supports, no glue: You need just: 1x M3x15-20 bolt with hex head 1x M3 hex nut 1x M5x20 bolt (with a knob to your liking) Everything can be printed without supports. I recommend at least 25% infill and a filament that will stand higher…
Side rails for old Yaesu FT-100 mobile HF/VHF/UHF Radio. NOT for modern FTM-100 UHF/VHF mobile radio. Side rails are 8mm thick. They are tall enough to leave an air gap under the radio. Printed with PETG, 20% infill, on Prusa MK2. Used…
This is is a bracket designed to attach a Yaesu FTM-150 control head and microphone to any AMPS (30 x 38mm) pattern mount. It works well with RAM mount or Lido Mount components for mounting the control head in a vehicle or even on a desk.…
This is a simple desktop stand designed specifically for the Yaesu FT-70DE handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model is optimized for 3D…
There are 3 open “ports” on the back of the FTM-300DR radio chassis - two speaker ports and one data port. These ports are left unprotected when they are not in use. This print is a simple “friction” plug that spans all 3 ports and…
RAM adapter for Yaesu FTM-500DR remote head. It matches the RAM-B-347U base. Uses all M5 hardware with Nyloc nuts. Support is only needed for the center M5 bolt that attaches to the back of the remote head. V2 model available in 2…
This is a simple desktop stand designed specifically for the Yaesu FT-65 and Yaesu FT-4X handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model is…
This is a side cover for the FTM-6000. M-Lok compatible slot for adding an antenna mount. This design is based off of the the Armoloq TTP-6000. This is a v.1 and has not been tested. Will work on left and right sides. Antenna mount can be…
I have a couple Yaesu radios, which use an MH-31 and MH-48 mic. The original hanger is cheap and thin sheet metal, which easily bends, so I created this holder. I believe I made this for #8 wood screws, due to naming the model the way I…
★★★ YOU MUST PUT THE FONT "Symbola" INTO C:/Users/your user/.fonts FOR THE UNICODE SYMBOLS TO SHOW UP. CREATE THE DIRECTORY IF IT DOESN'T EXIST ★★★ ★★★ You can get Symbola here (and many other places):…
Almost any material will do the job - I've printed mine with DevilDesign Matt PLA
Manopolina regolazione volume Apparato Quadribanda Yaesu FT-817. “Le Foto mostrano la Manopola montata su un Apparato Yaesu FT-817 che ho qua in Riparazione che il Proprietario ha perso.” https://www.iw2hqv.eu
Prints ok with 0.6mm nozzle. Do not use PLA unless it's used indoors. I a car window you need to use PETG or better filament to withstand the heat from the sun. The original bracket was screwed on so you needed tool to remove the display…
This is a basic desktop stand for the Yaesu FTM-150R dual-band mobile rig. It sits the radio up 2 inches at a 10 degree slope. The central ventilation ports are totally exposed. There's space under the control head to set down the mic.…
Printed on Bambu A1 without supports. Includes little indents for the slightly raised threads on the body. Doesn't interfere with the lanyard holes and battery is removable still.
Designed a mount for the Yaesu FTM-500DR/510DR for a Model 3/Y Tesla. My Tesla is older with the flip up charging tray so I needed something the tray would clear hence the offset. There's a 18mm hole that will allow an M5 thumbscrew to…
Mounting bracket for FTM-350 amateur TRX - i.e. for under-shelf mounting. TRX unit is secured with 4 screws (knobs are prepared for M4x16mm ones). Bracket has place for 5 mounting screws (countersunk head, up to 4mm, but can be drilled…
This is a 3D-Printed replacement for the volume knob of the Yaesu FTA-450 radio. It might work with other Yaesu products. I haven't tested that. I printed these at .05mm layer height. For the dual color - manual filament swap. Modeled in…
This is a holder to fit Renault Zoe Phase 2 (from 2019 on) for Ham Radio control unit Yaesu FTM-6000 and similar. I used PETG (Extrudr XPETG matte) and print on the side with tree supports. mod of…
A variation of my original Yaesu FTM-500/510 Tesla model 3/Y mount that sits flush on the bottom left of the center console screen produced in collaboration with Sam M. He had a folding hinge bracket we fit to the model to allow you to…
Transforms your hand-held PTT into a desktop mike. Use a small adjustable tripod and a ¼-20 UNC threaded insert. Heat press the insert in its matching hole, wait for it to cool, screw the part on the tripod. Use CAT, RTS, DAKY to trigger…
Inline PTT for Yaesu FT‑891 This project describes how to build an inline Push‑to‑Talk (PTT) unit that integrates directly with a headset for field‑portable radio operation. The goal is to reduce the number of cables, adapters, and parts…
Link to the ball: https://www.amazon.com/Composite-Adapter-Industry-Standard-mounting/dp/B07RJZ22FX I designed this to use 4 m3 heatset inserts EG…
I designed this to use 2 m3 heatset inserts It has a small lip to help the m5 screw that goes to the display from getting loosened by car vibrations. Unfortunately my ftm-400 started having issues on my last trip so no good pictures until…
This is a simple desktop stand designed specifically for the Yaesu FT-3DE handheld ham radio. The stand holds the device at a 12° backward tilt to improve visibility of the display when placed on a desk. The model is optimized for 3D…
This will adapt a Yaesu FTM-510 or FTM-500 to a standard 38x30 AMPS mount using a 5mm stud. Or any other radio that uses a 5mm stud. It is designed to work with a quick release adapter that attaches to the device, rather than screw…
Ersatz-Knopf für das Funkgerät Yaesu FT2D. Kann auch für andere Zwecke/Potentiometer mit 4mm Achse und Fläche verwendet werden.
Microphone holder for the Yaesu MD-1 desk Mic. May also fit on other Yeasu microphone models.
Welcome to my second model. I made this out of PETG for rigidity. It hooks over the top of a flat panel monitor and supports the head unit for a Yaesu FTM-400 (and XD). This is not compatible with every flat panel monitor in existence,…
The Ring Adapter is designed to securely lock the Quad Lock Pivot Arm Ball in place, preventing any unwanted rotation on the Yaesu FTM-510 (and compatible FTM-5xx series) chassis. It provides a firm, reliable connection between your radio…
Mic/Headset Plug Retainer This attachment for the Yaesu FT-60R slides on to the battery and allows for the easy application of a rubber band to apply direct pressure to the mic/headset jack to make sure it doesn't half pop-out while…
I made this for my father to fit his radio in dodge durango under car's radio
The Yaesu FTM-150R(ASP) is a pretty good radio for working FM repeater satellites. It is able to do crossband duplex, has good harmonic filtering, and has a good receiver. It is a bit clunky to use with a handheld beam antenna (Arrow or…
This is a faceplate / trunnion for a Yaesu FTM-100D to hold it into a 10" rack. I based this on the 10" rack that many homelabbers are using for Ubiquiti gear. I thought a 10" rack would be perfect to hold two way mobile radios. This…
Yaesu FTH-7010 UHF FM Transceiver PTT button Material : Filament PM TPE 88 RubberJet Flex 1 permiter no support 10% infill
Model Created in OnShape. You can modify or create a derivative work using the link below.…
Better knob for the Yaesu-7100 vhf/uhf radio. Prints perfecly well on my prusa mini with prusament PLA. 73s from HB9INC
FTM-500D Mounting Bracket to fit AMPS style platforms I wanted to mount the FTM-500D radio in the vehicle but wasn't super happy with many of the options I found. I bought a platform from https://www.bulletpointmountingsolutions.com/ and…
Update 10-4-2025: the double-sided tape held temporarily. I have added M3*20 screws after drilling into the backside of the dashboard rails (meeting soft plastic inside). Bracket for mounting the Yaesu FTM-150R detached control head…
Just got my Yaesu and realized I needed a stand to tilt the radio up, and provide a place for the microphone to attach. I came up with this simple model. This holds the entire radio and not just the face which is what I wanted. I printed…
This is side rails for the Yaesu FT891 HF radio, they should be used with 4 pieces of M4x10 screws with washers(smaller than 10mm diameter). The frame will protect the buttons on the front during field operations or transport. I recomend…
I just needed a bracket to mount the ‘main’ part of a Yaesu FT-891 in my camper van, so I threw this one together. Radio fits fine either way. Probably best to print with PETG if in a vehicle, and the added strength will help as well.…
This is a custom 37° tilt stand designed for the Yaesu FTX-1 Field . The stand is only compatible when the SPG-1 Carrying Protector is mounted. The stand is 3D-printed in Prusament PETG Matte Black using a 0.4 mm nozzle. Print settings…
This is a remix; the original doesn’t fit properly when the FTX-1 is mounted on an Optima PA unit. I also removed the elastic band tabs on the side, since they interfere when the unit is placed on its side. Printed with a 0.6 mm nozzle…
I needed a home for the mic, something strong that wouldn't stand out. Printed in PETG using the “Strength” profile on a QIDI Plus4. Designed to mount on the right side of the Yaesu FTM-150R + Ford Fusion 2016 Detached Head Mount using…
Mic/Headset Plug Retainer This attachment for the Yaesu FT-60R slides on to the battery and allows for the easy application of a rubber band to apply direct pressure to the mic/headset jack to make sure it doesn't half pop-out while…
Model Created in OnShape. You can modify or create a derivative work using the link below.…
FTM-500D Mounting Bracket to fit AMPS style platforms I wanted to mount the FTM-500D radio in the vehicle but wasn't super happy with many of the options I found. I bought a platform from https://www.bulletpointmountingsolutions.com/ and…
A simple stand that creates a larger foorprint for the FT5 and offers more stability.
This is a Ram Ball mount for Yaesu Radio's. I Originally designed this for my FTM-500D. Yaesu uses an M5 x .8 screw to mount their remote heads on multiple models. I do know this fits the FTM-500D and FTM-510DR/DRASP. I had access to both…
The Yaesu FTM400 VHF/UHF amateur radio transceiver has a separate control head that can be mounted away from the main body of the transceiver. It comes with a sheet metal stand that can be attached to a top surface, but the back of the…
A desk top unit to hold your FTM-500 series radio consisting of the main frame, with left or right side option for the microphone. A separate holder for the radio head unit that is used to attach to the main frame or be used separately to…
Dash Mount for Yaesu FTM-310DRASP This is a very simple dash mount that fits reasonably well on my 07 Honda Fit's funky dash. The base pad is dimensioned roughly 2" x 4" to fit a commonly-available pre-cut velcro strip (use the highest…
I Needed a Lido T-Plate mount for my FT8-91 so I that i could remove head from the lido stalk in the car when I wanted to use the radio outside the car for things like pota. The plate has a hole for a 5mm button head cap screw to thread…
Designed as a simple adapter to mount the top of a Yaesu ATAS-120 inside a 2" PVC pipe, while allowing a 1/2" PVC pipe to extend upward and protect the antenna’s upper wire. The 2" side provides a stable seat, and the 1/2" pipe acts as a…
This is not that great, may even have holes.. but i filled them. I had to completely break apart my ATAS 120 I should have a tutorial on commogods.com explaining it all with pictures. In order to repair a broken solder. I printed in ASA,…
This is a clip on pad for the tuning dial of a Yaesu FT-450D. It was designed it during the 2020 ARRL Phone Sweepstakes to help with tuning around. This will fit radio dials that are 35mm in diameter. I used PETG for outdoor use but you…
Given the original files were irretrievably archived by Autodesk during their Fusion 360 downgrade, this will be the last version. THE V5 FILES ARE CURRENT AND HAVE CORRECTED DIMENSIONS The "Fancy" version has some nice chamfers and…
Microphone holder for the Yaesu MD-1 desk Mic. May also fit on other Yeasu microphone models.
I wanted a case where i can fit the manual, the antenna the charger and the adapters for the charger. In order to add more protection i added some "reinforced" bubble wrap to the bin for the radio. The Antenna bin is a bit thight.
I made this for my father to fit his radio in dodge durango under car's radio
The CatTouch control-display for Yaesu radios from Catmeters.com is awesome. But I wanted a case that tucked up under the SP-10 Speaker a little better. This is what I came up with. This design is “screwless”. The Boards just snap into…
The Yaesu belt clip for the VX radios allows you to remove the radio from the clip by turning it upside down. The clip is cheap to purchase and this adapter allows you to use it with an ID-50, ID-52 and even an IC-T10.
An adaptation of ‘SurfinBirdmans’ rails for the Yaesu-857 which adds a 5cm extension to the rear of the radio to provide more space for cable management, useful if being stored vertically in a backpack.
Slide in Mountplate for ft-891 Display. Slides in just like on the original body of the radio. Handy snap on tool in combination with the seperation kit of the Yeasu ft-891 Print With support only on buidplate only. flatside in the…
Anderson Power Pole adapter for the Yaesu 817, 817ND, 818 and 818ND.
I run my Yaesu FT-891 with the front prop up and that aims the speaker up and away from me. I designed this dome to fit over the speaker and push the sound more in my direction. It uses several 6mm x 2mm magnets to secure it to the top of…
Inspired by a pilot workshop episode about total electric failure and the use of a backup handheld nav/com, I adapted a holder for a different handheld to my Yaesu FTA-850l, so I can mount it on the dash and not only use it for backup…
This are feet for the Yaesu FT-991A transceiver. I needed I slightly higher angle then the holder which came with the radio could provide Update: I realized I forgot to mirror one of the feet in the pair file. This mistake is corrected in…
I purchased a used Yaesu FT-991 from a heavily involved member of our ham radio club that sadly became a silent key last March (2023). The radio was missing the MULTI knob and I said no big deal, I got a 3D printer, I can always make a…
I wanted to create a housing for the Peerless by Tymphany PLS-P830984 Speaker to use it next to my Yaesu FT991A. The Yaesu SP10 for 100 bucks seems to be very bad so I researched and bought that speaker. Its an easy box, definitely much…
Yaesu 991A Microphone holder, mounts to the side of the radio in the two per-existing mount holes, requires 2 M4-0.7 x 10MM screws. 991a-mic-bracket.stl: the mounting bracket with the microphone holder attached bracket.stl: the bracket as…
Front cover for Yaesu FT-991/A The scaled stl file is a slightly snug fit the not scaled version is better with foam draft excluder tape to make it a nice snug fit. Fusion 360 file included . if you re-mix it please post as such. Have fun…
