Yaesu FTM-350 mounting bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting bracket for Yaesu FTM-350 main unit.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Mounting bracket for FTM-350 amateur TRX - i.e. for under-shelf mounting.
TRX unit is secured with 4 screws (knobs are prepared for M4x16mm ones). Bracket has place for 5 mounting screws (countersunk head, up to 4mm, but can be drilled for larger diameter).
Please note, that unit has mounting holes placed closer to the back of the unit, so speaker comes to the open side of the bracket.
Printed with ordinary PLA (100% infill using 5 perimeters with nozzle diameter 0.6mm). Knobs printed with large diameter nozzle may need some force to install screws, technique similar to nut pulling may be beneficial (remember to use a washer).