1 / 4
Case for the CatTouch Display for the Yaesu FT-991a — zdjęcie 1
1 / 4

Case for the CatTouch Display for the Yaesu FT-991a

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Redesign of the Case for the CatTouch, with positioning "Ears" for the SP-10 Speaker

Ocena
5 / 5
Polubienia
18
Pobrania
167
Wydruki
0
Wyświetlenia
2163
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

The CatTouch control-display for Yaesu radios from Catmeters.com is awesome. But I wanted a case that tucked up under the SP-10 Speaker a little better. This is what I came up with.

This design is “screwless”. The Boards just snap into place. Remove the On/Off Knob when mounting. 

There is an STL without the "Ears" or the Stylus Holder if you prefer. The Cable Clamp is optional, and needs two M2 screws. Print with Supports!

** Update 11/30/23: As requested, remixed “upright” version added. This version has NOT BEEN TESTED. May be difficult to get the boards in.

Tagi