ATAS Yaesu Antenna top rubber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Noobsy for the ATAS antenna - as I know - no longer available, so me print our own version - TPU
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks for supporting me:
Patreon: https://www.patreon.com/dm4ds
Paypal donation: https://www.paypal.com/paypalme/dm4ds
BMAcoffee: https://buymeacoff.ee/dm4ds
Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u
Etherium: 0x3447f956194706eCDab747314CFB92Bf55428F28
____________________________________________________
Hi Ho
a friend asked me while he was not able to find a replacement to make one.
And here we are.
Printed it with 58A TPU and it was a little stiff but does the job. If you have harder TPU maybe you have to make the part 2% bigger.
The top hole has 1 layer closed so it can be printed without support, you only have to "drill" the hole after the print into that 1 layer. Or you use the antenna from the "wrong" side to push via the layer.
Nothing else special in this part.
If you need it modified, write me an email.
Thanks for a TIP
Stay safe / Take care
Sandor
Print Settings
Printer Brand:
Ultimaker
Printer:
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
10-30
Filament: Sunlu TPU 58A black
Notes:
If you have no experience with TPU, print slow, thats the goal for TPU :)
Nothing special you must care about in this part.
Category: Electronics