Mounting bracket for Yaesu FTM-150RASP control head and microphone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is is a bracket designed to attach an FTM-150 control head and microphone to any AMPS pattern mount.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 571
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is is a bracket designed to attach a Yaesu FTM-150 control head and microphone to any AMPS (30 x 38mm) pattern mount. It works well with RAM mount or Lido Mount components for mounting the control head in a vehicle or even on a desk.
The bracket has a contour to prevent the control head from twisting. I also used some adhesive foam to help maintain a solid connection to the control head and mitigate vibration.
Print with suitable filament for your use case (I used PETG-CF for my car) with traditional supports enabled.
It is designed for M4 hardware (except for the M5 radio screw) because that is what I had on hand , I think AMPS usually uses M5.