Drip Tray for Dish Brush
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small drip tray for a dish brush where it can be stored and dry off.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to have a storage place for a small dish brush where it can dry off.
The brush I'm using has roughly a 73mm diameter at the bristles. I first used the dish and tray sized to 73mm (diameter of the tray), however some stubborn bristles always caught on the lip when placing the brush into the dish so I added 5mm and ended up using the 78mm version.
I first planned on using some rubber feet on the dish, that's what the markers on the bottom are for, but ended up using it without them.
Just leave a comment if you need a different size and I'll try to upload a new version.
Pictures are from the 78mm version.
Printing
- Printing STL or STEP file?
- Usually I like to print step files directly however PrusaSlicer doesn't make a good job tessellating the model.
- The stl files I uploaded are high resolution exports from FreeCad
- Material: I used PETG (Extrudr PETG Turqoise)
- Nozzle: 0.4mm
- Infill: 15%
- Layer Height: 0.2mm
- Perimeters: 3, together with the nozzle size and layer height this will result in exactly 5 lines for the dish wall
- Supports: no, print the tray upside down
Changelog
- 2024-09-26: Uploaded first version in 73mm and 78mm.