Printables Makerchip (Single Extruder - Dual Color)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Makerchip with the Printables logo looks like a dual color print and there is a twist!
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 54
- Wydruki
- 1
- Wyświetlenia
- 453
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this Printables Makerchip especially for the contest: Single Extruder - Dual Color
The chip can be printed with any singel extruder printer. It is made out of three parts (one body and two inlays) and after printing you just press the parts together. You will have one Printables makerchip with two colors per side. My print is the "official" orange on white but when you flip it you get the dark mode! ;o)
I hope this is an inspiration to make more makerchips even if you don't have an MMU, AMS or tool changer.
The inlay with 0.05 mm toleranz printed on my Prusa MK3S+ fits perfectly but for my other printers I needed a bigger toleranz. I added models with 0.1 mm and 0.15 mm toleranz.
Slicing:
No support is needed and the models should be printed in 0.2mm layer hight and with 100% infill.
WARNING:
If you use this chip at your next poker night you will bet your 3D printer! ;o)