Printables Makerchip (Single Extruder - Dual Color)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.09 – €0.11 net (excluding VAT)
For file: Makerchip-Inlay-0.05_0.2mm_PLA_MK3S_7m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.10 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 6.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This Makerchip with the Printables logo looks like a dual color print and there is a twist!
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 54
- Makes
- 1
- Views
- 453
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this Printables Makerchip especially for the contest: Single Extruder - Dual Color
The chip can be printed with any singel extruder printer. It is made out of three parts (one body and two inlays) and after printing you just press the parts together. You will have one Printables makerchip with two colors per side. My print is the "official" orange on white but when you flip it you get the dark mode! ;o)
I hope this is an inspiration to make more makerchips even if you don't have an MMU, AMS or tool changer.
The inlay with 0.05 mm toleranz printed on my Prusa MK3S+ fits perfectly but for my other printers I needed a bigger toleranz. I added models with 0.1 mm and 0.15 mm toleranz.
Slicing:
No support is needed and the models should be printed in 0.2mm layer hight and with 100% infill.
WARNING:
If you use this chip at your next poker night you will bet your 3D printer! ;o)