Samsung S24 Ultra TPU Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A thick, bulky and hardy case printed in TPU
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 660
- Wydruki
- 1
- Wyświetlenia
- 3064
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
A thick and bulky utalitarian case for the Samsung S24 Ultra meant to be printed in TPU.
It has saved my s24 ultra from multiple accidental falls, and my phone just bounced and remains unscathed so far.
The camera lens and screen are recessed deeper than typical cases to prevent accidental scratching when the phone slides on a flat surface with debris.
A notch has been placed near the cutout for the volume rocker button to help with a tactile “blind” feeling for the buttons
It is recommended to print with a very low infill of around %10 and 2 walls to create soft and hollow bumpers. Tree supports are highly recommended, use a different material like PLA for supports if you have multi-material capabilities.
When adjusting the infill pattern/angle/density, try to ensure the corners of the case are free from sparse infill to reduce the rigidity of the case in the corners. This helps with softening impacts on the corner.
The diameter of the holes for the camera are made to be compatible with camera lens protectors similar to this: https://www.amazon.com/ESR-Individual-Protectors-Scratch-Resistant-Ultra-Thin/dp/B0CLP3SD23
The holographic triangle effect on the outer side of the case is achieved by printing on a holographic PET/PEI bed like this: https://www.amazon.com/YIBEICO-PEI-Magnetic-Smooth-Texture/dp/B0CXHM3ZGJ
The print will adopt the texture of whatever plate you use, smooth for smooth PEI, satin for satin, and textured for textured etc. It is also recommended to increase the flow for the first layer to ensure a smooth and fully filled-in even layer, any elephant footing caused by this can be compensated for using the elephant foot compensation setting.