M6 10mm T-Slot Rotating Hammer Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotating M6 Hammer T-Nut to suit 10mm T-Slot
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 129
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a rotating T-Nut to suit a 10mm T-Slot opening at the top.
This was designed to attach a spoil board to a 6090 CNC so it could drop in from the top without having to align the spoil board to the T-Nuts below. Just attach nuts to the installed screws in the spoil board, prior to installing the spoil board to the CNC then drop the in the slots, tighten and all is good in the world.
The M6 nut is a nice fit and shouldn't slip out, suites M6 nuts available in Australia from Bunnings hardware stores.
I have included FreeCad file, please adjust to suit your needs.