P
Printables
Timemore Chestnut C3s max container
Keep your grinder and cleaning brush neatly stored together with this specially designed container.
Wyniki wyszukiwania: tnut
Liczymy pasujące modele…
P
Printables
53 mm Coffee Blocks Block with Hole for Timemore Chestnut C2 Grinder
Link to onshape project: https://cad.onshape.com/documents/eeccd3089bbf2cbb6f8b5721/w/77ac7ba8d4f1ddeee653b5c9/e/2bc171e
P
Printables
Tnut bar for INBXX
Print 2x of each TnutBar, add some M3 nut in every slot and insert them into the aluminium profile. The tnut bar are splitted (so you need 2x for each tnut bar) to fit them on the core one bed. For the INBXX project you will need 16x…
P
Printables
Ikea Skadis Tnut Interference Threaded M3 Longer
Well the shorter one always broken, No idea why. So I make the Longer one.
P
Printables
Funnel for Coffee Grinder Timemore Chestnut C2
The model can be printed without support material.
P
Printables
Paco a chestnut man :)
There is autumn outside, chestnuts falling down from trees… so why not to use them. Making a chestnut man with kid will never be the same. Noo match or nails needed… :) Have fun and get inspired. :) Parts has built in screws, which are…
P
Printables
Berserk - Chestnut Puck Keychain / Figure
A keychain or standing figure of Puck from the manga Berserk in his famous chestnut state. 3MF includes all Versions already colored, stls are single color and merged. Is printed with two halves and secured with pins. I advise do glue…
P
Printables
Skadis holder for Timemore Chestnut C3s coffee grinder with brush
I designed this coffee grinder holder to attach my grinder to my Aeropress Skadis Caddy (from Rifnshred). All other models needed too much filament and I wanted one which can hold the TimeMore brush also but without wasting space on the…
P
Printables
Chestnut Lampshade
Simple lampshade designed to be printed in vase mode in PLA. Designed for a standard 26mm lightbulb fitting (measure yours before you print) . Includes vent holes just to keep the PLA parts cooler. If you've never measured a lampshade or…
P
Printables
M3-4-5 Tnut
A quick print model for M3, M4, and M5 tnuts. Printed the test pieces in PLA with 100% infill and no supports.
P
Printables
M3 Tnut for Nut5 Profile (5mm)
my Tnut M3 for 20x20 alluminium profile Nut5 (5mm) Print Settings Printer: Tronxy X5SA Pro Rafts: No Supports: Doesn't Matter Resolution: 0.2 Infill: 100% Filament: Geeetech PLA Blue Category: Household Supplies
P
Printables
Chestnut C2 Grinder Funnel
Funnel with the dimensions to fit perfectly on top of a Chestnut C2 grinder
P
Printables
TIMEMORE Chestnut C2 Funnel
Coffee Grinder Funnel Designed for coffee enthusiasts, this funnel makes grinding mess-free by guiding grounds directly into your container. With a snug fit and easy-to-clean design. Print Settings Printer Brand: Creality Printer: Ender-3…
P
Printables
Funnel for Timemore Chestnut C3
I printed in PLA using the following settings: 0.4mm nozzle 0.2mm Layer height 5% gyroid infill 4 perimeters No supports Make sure to print it with the larger opening facing down (last photo as example), use brim if you face difficulties…
P
Printables
Electric coffee grinder - Timemore Chestnut
This turns the Timemore C2 (or C3) into an electric grinder ! It uses magnets for ease of cleaning and to allow the user to be able to change the grind size with taking everything apart. Instructions : Main body : print on the back,…
P
Printables
AeroPress + Chestnut Coffee grinder
There are a few models for AeroPress and chestnut coffee grinder, but nothing for a vertical mount - which I wanted - to avoid waiting to dry up the parts. Both pieces are getting sorted together with a minimum(!) of required space;…
P
Printables
Parts Box Wall Skadis Holder Organizer Adjustable Tnut
Wanted a custom and strong system that was adjutsable and that allowed me to organize the plastic bins that nuts bolts and washers come in. Appreciate the feedback! Attached to my skadis board with Tnut System , I personally used the 3mm…
P
Printables
Timemore Chestnut C5 / C5 ESP 2-in-1: funnel (or trichter) & handle holder
Tricholder for Timemore Chestnut C5 / C5 ESP handgrinder. It's 2-in-1 accessory: funnel (or trichter) & handle holder. Compatible with Timemore Chestnut C5 Series.
P
Printables
Buck converter (LM2596) Case Mountable Aluminum extrusion M3 Tnuts
If you have any suggestions or requests I am more than happy to help. Drop requests and suggestions in the comments! Make sure to leave a like if my models help you! You doing this helps other's like yourself find my models! Simple sturdy…
P
Printables
Timemore Chestnut C3s max container
Keep your grinder and cleaning brush neatly stored together with this specially designed container.
P
Printables
Chestnut cutting aid
This chestnut cutting aid is designed for the edible chestnuts that drop in autumn where I live. The vertical and horizontal slits help guide a kitchen knife to the right depth for scoring before roasting. This version has three different…
P
Printables
Chestnut leaf
Decorative chestnut leaf, 5cm in size, 1mm thin. Feel free to scale. Print setting any filament 0.4mm nozzle (or smaller) 0.2mm layer height no supports default infill Additional models from series Oak leaf -…
P
Printables
Chestnut Infrared-/Laserscan | Kastanien-Scan mit Creality Sermoon S1
EN: This is a Creality Sermoon S1 scan of a chestnut. The scan was created with a resolution of 0.2 mm and blue cross, parallel and single lasers. I also did an infrared scan. — I would be very happy if you have as much fun with the…
P
Printables
Drill for chestnuts
Dit is een kastanje boor waarmee je gaten in kastanjes kan boren en er zo met behulp van bijvoorbeeld stokjes van alles mee kan maken. Leuk om bijvoorbeeld spinnenwebben te maken(zie foto's). Ook makkelijk om kinderen mee creatief bezig…
P
Printables
holder for Chestnut C3ESPpro, Brush, Sprayer
i needed a holder for my coffeegrinder, so i designed it myself.
P
Printables
3018 CNC Tnut - M3 Heated Insert
Upgrade your 3018 CNC using TNuts and standardized M3 Heated Inserts. Improve Fixtures and mounting for milling and Laser Etching projects.
P
Printables
Tnut M3 for 30x30 profile with screwdriver slot
Tnut for 30 x 30 extruded profile with screwdriver slot to easily turn it when inside the extrusion. The shape of Tnut is derived directly from the shaper of the slot in the 30x30 extrusion with 0.1 tollerance per side. In order to be…
P
Printables
53 mm Coffee Blocks Block with Hole for Timemore Chestnut C2 Grinder
Link to onshape project: https://cad.onshape.com/documents/eeccd3089bbf2cbb6f8b5721/w/77ac7ba8d4f1ddeee653b5c9/e/2bc171e
P
Printables
Timemore chestnut C2 motorized grinder
video Timemore diy motorized 3d printed automated coffee grinder - YouTube Autodesk Fusion 360 assembly (f3z) included. Stl files and 3mf files included. Or you can generate it from Fusion 360. DC motor is available also on conrad web…
P
Printables
Tnut bar for INBXX
Print 2x of each TnutBar, add some M3 nut in every slot and insert them into the aluminium profile. The tnut bar are splitted (so you need 2x for each tnut bar) to fit them on the core one bed. For the INBXX project you will need 16x…
P
Printables
Ikea Skadis Tnut Interference Threaded M3 Longer
Well the shorter one always broken, No idea why. So I make the Longer one.
P
Printables
Chestnut C5 Pro (coffee grinder) brush holder
I just wanted to have a fixed place for the brush. It used to lie around the coffee grinder without a proper place. Printed in PLA with a 0.12 mm layer height and 25% infill. No supports required. See images for the recommended print…
P
Printables
Kastanjemanden (The Chestnut Man)
Characters inspired by the Danish Netflix tv show "The Chestnut Man" / "Kastanjemanden" Design by 3DO www.3do.dk
P
Printables
SLOTnut
On pdf file, do what you can to make these fit and slide. A = Ball for slider B = Inserts
P
Printables
Horse Art - Chestnut Leopard Appaloosa
Horse Art - Chestnut Leopard Appaloosa 3D printable model.
P
Printables
End Cap for Tnutz 1515 Aluminum Extrusion
End cap for 1.5" x 1.5" Smooth T-Slotted Aluminum Extrusion Made for EX-1515 from Tnutz
P
Printables
timemore chestnut c3 repair
Stronger core for coffee grinder timemore c3, the original fail sometimes. I printed it upside down with supports, 4 walls, and 35% infill. Make sure you install the upper grinder correctly, i assembled it upside down the first time. The…
P
Printables
Chestnut G1 Grinder Funnel
Quick funnel I put together in Tinkercad to help with loading beans. Suited to fit Timemore Chestnut G1, will work with similar sized grinders. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200…
P
Printables
3030 T-Slot Profile and T-Slot nut - tnut (M5)
I drew a 3030 profile with a matching nut with an M5 thread. I printed with PLA on my MINI + - it turned out pretty well. Print as in the attached photo:
P
Printables
Knipex Pliers Holder skadistnut
Modified this holder with a hole for 2.5mm screw. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards
P
Printables
Knipex mini pliers holder skadistnut
The holder is modified to hold the "Knipex 86 05 150 Zangenschlüssel 27mm 150mm" The holders spacing is 26mm. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards
P
Printables
Timemore Chestnut C2 Cap + Holder
Timemore Chestnut C2 Cap + Holder. Now you can store both the handle and coffee grinder in one convenient place! Edit V3/3.1 versions is for Chestnut C3 Printing tips: Suggested orientation in the picture, no supports needed. There are…
P
Printables
Chestnut Basket Voronoi
Print instructions Printer brand : Creality Printer model : Ender 3 v2 Rafts : NO Suports : YES, but only for bottom and rim part (using Cura function for blocking supports “E”). See photo. Resolution : 0.28 Infill : 15 Speed : 70…
P
Printables
Chestnut Cutter
This is a print in place chestnut cutter. I only used support for the hinges as you might see in the gcode file. The cutter might not work as good as one with a metal blade but i wanted to create a print in place variant. Improvements and…
P
Printables
Heatset Bit Holder: Skadis-TNut
This holder mounts on a Skadis pegboard using TNuts (2.5mm). It holds 5 heatset insert bits in sizes 2, 2.5, 3, 4, 5 mm. The unit is in two parts allowing you to remove the main holder to take to your work area. The pics above use PETG,…
P
Printables
Skadis TNut Hooks with offsets
There are 3 hooks for use in a Skadis pegboard. Each has its mounting point offset by 5mm to allow two hooks to be used to support 2 uneven ends of a single tool. See the picture of the hammer for an example. This is designed to support…
P
Printables
Skadis Timemore Chestnut C3 Pro Holder
I designed this Skadis Holder for my Timemore Chestnut C3 Pro coffee handgrinder based on the Skadis Secure Clip System from mkingery. The Handgrinder fits really good in this holder (not to tight but not too loose as well). For mounting…
P
Printables
LTT Screwdriver Skadis Holder - TNut
Overview This is my LTTStore screwdriver mount for my Ikea Skadis, which uses the T Nut System made by 6d6178 and was made using dimensions from MiniMadRyan's LTT Screwdriver Mockup . It has a number of versions included with/without…
P
Printables
Minimal LTT Screwdriver Skadis Holder - TNut
Overview This is a heavily modified and slimmed down version of my LTTStore screwdriver mount for my Ikea Skadis, which uses the T Nut System made by 6d6178 and was made using dimensions from MiniMadRyan's LTT Screwdriver Mockup . My…
P
Printables
Timemore Chestnut C2 compact handle holder
A Timemore Chestnut C2 attachment that provides a way to store the handle vertically alongside the grinder while also providing dust protection for the funnel. Should likely work on the C3 (please confirm with a comment). For a perfect…
P
Printables
BoltNut-Tensegrity
Bolt and nut - held by wrenches - connected by a thin thread, keep a fixed distance to each other and although not screwed, still give the whole object a stable structure. It is a fascinating experience when, after the 3D printing and the…
P
Printables
Altoids Tin Skadis Mount - TNut
Overview This is a mount for a altoid tin to Ikea Skadis, which uses the T Nut System made by 6d6178 My skadis is mounted to my Raskog Cart, so I put these altoid-sized tins (from Adafruit) up on there to hold the bits for my LTT…
P
Printables
1515 makerbeam xl nut blocker (tnut style) for v0
If you are as dumb as I and you dont use "No-Drop nuts" mod when you built your v0, and you hate those nuts that always are not in place where you need them - this will resolve your issue. You print 2, and insert them before/after nut and…
P
Printables
Halder Mallet IKEA SKÅDIS Holder - TNut
Overview This is a mount for a mallet to SKÅDIS, which uses the T Nut System made by 6d6178 My SKÅDIS is mounted to my Raskog Cart, so I put my Halder 40mm Simplex Mallet up for storage. Realistically, it should work for your 40mm mallet,…
P
Printables
Funnel for Chestnut Slim 3
Quite self explaining, just a funnel for the Chestnut Slim 3 coffee grinder print with no supports needed (big side on print bed) i did a 0.2 mm PLA print with 10 % infill, 0.4 mm nozzle
P
Printables
Chestnut C2 Coffee Grinder Holder / stand
Got into coffee, got a Chestnut C2, designed a simple holder to hold the grinder, ground holder and brush
P
Printables
Squirrel chestnuts Gyro
Squirrel chestnuts Gyro Play way like this MV: FB： https://www.facebook.com/ Print Settings Printer: CR-7 Rafts: Yes **Supports:** Yes How I Designed This =================== 123D Design Mix by Meshmixer Category: Fashion
P
Printables
timemore chestnut C2 holder
timemore chestnut C2 holder with a spot for the cleaning brush! the timemore c2 is somewhat top heavy and falls over pretty easily, so i designed this holder to make it a bit better the bottom diameter is 82mm, instead of the default 51mm…
P
Printables
Skadis Holder for the Cheap Screwdriver Set (SkadisTNut, FreeCAD)
Most people I know do own this rather horrible “precision” screwdriver set. It somehow sneaks into every household, and I have often wondered if there is some conspiracy to be found here. In order to at least get that thing from my desk,…
P
Printables
Parametric Glue Stick Holder for Skadis (SkadisTNut, FreeCAD)
This is a holder for fixing cylindrical objects to your Skadis pegboard using the fantastic Skadis T-Nut System. The default bottle diameter is chosen so that the holder is perfect for the UHU Glue Stick (40g), but the diameter can be…
P
Printables
Skadis Holder for the Ruthex Deburrer (SkadisTNut, FreeCAD)
This holder will enable you to stick your Ruthex Deburring Tool ( https://amzn.to/4761AGS ) on your Skadis Pegboard. There are other deburring tools I saw on Amazon that look exactly like this one, but I don't know if their blades come in…
P
Printables
Ryobi Battery holder for skadistnut
I needed a Ryobi Battery holder, and found one. Remixed it to use less filament and use the skadis t-nut system for M2.5 : https://www.printables.com/fr/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb Printed in PLA…
P
Printables
Knipex Pliers 7020160 Holder Ikea SkadisTnut
An adapted model to fit the 70 02 160 plier. Printed in 0.3mm with PETG.
P
Printables
Drill Press Tnut Groove Cleaning Tool
A tool to clean the chips out of the t-nut grooves in a drill press table.
P
Printables
Timemore Chestnut C2 C3 replacement lid
This is a replacement lid for Timemore's Chestnut C2/C3 coffee grinder as the original has a tendency to break after some time. I recommend one of the 46mm variants in order to minimize the amount of microplastic in your coffee. The…
P
Printables
Tool-Less Twist Tnuts
Stop using screws, inserting nuts, and start making your own aluminum extrusion hardware. Designed for 80/20 25 and 40 series aluminum extrusions. Drop in place, twist and attach your projects to your aluminum extrusions. These also have…
P
Printables
Soft sleeve for Timemore Chestnut Slim
Do your hands hurt when grinding coffee on the go with your Chestnut Slim grinder? Here's the solution. Recommended print settings Material: TPU 95A Nozzle: 0.4 or 0.6 Walls: 2 Infill: Gyroid @ 5, 10 or 20 percent, depending on how soft…