1 / 2
Door Stop Damage Covers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a simple cover that you can glue in place. It has the middle extruded so if you're installing on an installed door it will sit on the hole while the glue dries so it won't slip.
Personally, I secured these with hot glue as it sets up quick so I know it wouldn't run down the door after I walked away. But you could also use super glue.
I've included 3 different sizes that I used for 3 different levels of damage caused by these outdated door stoppers.
Sizes:
- 26mm with 15mm extruded center
- 26mm with 13mm extruded center
- 16.60mm with 4.92mm extruded center
If you need any other sizes just let me know. I can quickly edit and upload more fairly quickly.