Sunlu 250g spool desiccant canister/holder compatible with hygrometer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired from the many great desiccant holders, created from scratch to serve the needs of Sunlu 250g spool owners.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This desiccant canister was designed to be used with a round cheap hygrometer. The hygrometer is pressure fitted directly in the spool core but leaves no room for anything else, the canister needs to be inserted from the other side. Since there's no place to hold the canister, this the design requires it being pressured fitted into the spool core – i.e. printing in a well-tuned machine is important (print the pressure-fit tolerance test to confirm)
As both ends of the spool core are pressure fitted, the desiccant beads should be safely contained inside, but given that there's a risk of the beads being spilled during handling, I've included an optional inner cap to keep the beads more safely contained. The inner cap has very fine thread and a tight clearance, which might be a challenge for some (print the 2 screw tolerance test to confirm)
Recommended print settings:
- Layer height: 0.2mm
- Filament type: PETG or ABS recommended but PLA is also okay if the spool is not exposed to high temperatures.
- Perimeters/Wall count: 2
- Top/Bottom layer count: 3
- No support structures required (make sure to orient the canister and cap with the larger surface to the bed, if not already oriented that way).
To create the pattern on the top surfaces of the canister and cap, it's required to split the STL models into parts in your slicer, selecting the relevant part and applying modifiers to:
- Remove top and bottom solid layers (i.e. set the value to 0)
- Set perimeter count to 2
- Set fill density to 30% or any value you want
- Set fill pattern to Honeycomb or any other pattern you want.
To remix, please open the CAD design found in OnShape.com
