BetaFPV CO3 light canopy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A lightweight canopy in TPU to replace the BetaFPV air canopy
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 245
- Wydruki
- 0
- Wyświetlenia
- 1701
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I broke my Air65 canopy and didn't want to wait for shipping of a new one. I've seen a similar model to this one on the internet for other cameras, and I couldn't find a light weight canopy for the betafpv CO3 camera that I could use, so I designed my own.
The Air canopy weights only 0.6 gr, and I tried to design this to match that, obtaining actually a 0.5 gr.
I thought it would have a lot of vibrations/jello but after testing it for a while I don't have any problem.
This model is 20 degrees, I may do some other angles later and upload here.
To print in TPU, with supports. I use organic supports and it worked fine.
The camera is hold in place by friction but despite many crashes it didn't matter.