1 / 2
Strain relief for the Fara-J antenna by VE6SFX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Takes the weight of the coax off the antenna's BNC connnector and PCB.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This clamp goes on the bottom end of the Fara-J antenna by VE6SFX. It takes the weight of the coax off the antenna's BNC connector and PCB, transferring it to the fabric of the strap.
NOTE: The clip needs to be printed on it's end for strength.
There is a channel and clip sized for RG-58 coax. The clip snaps in, clamping the coax to the assembly. If you're using a larger coax, you can use the clip channels and some zip ties.
The assembly clamps onto the strap with two M3x8mm screws.