1 / 2
Strain relief for the Fara-J antenna by VE6SFX — image 1
1 / 2

Strain relief for the Fara-J antenna by VE6SFX

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Takes the weight of the coax off the antenna's BNC connnector and PCB.

Rating
0 / 5
Likes
5
Downloads
29
Makes
0
Views
145
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Public Domain

This clamp goes on the bottom end of the Fara-J antenna by VE6SFX. It takes the weight of the coax off the antenna's BNC connector and PCB, transferring it to the fabric of the strap.
NOTE: The clip needs to be printed on it's end for strength.
There is a channel and clip sized for RG-58 coax. The clip snaps in, clamping the coax to the assembly. If you're using a larger coax, you can use the clip channels and some zip ties.
The assembly clamps onto the strap with two M3x8mm screws.

Tags