The Swizz Bearing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
High tolerance bearing for fidgeting. Easy print, no supports, high quality.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Sorry its so huge, but i wanted it to be nicer, when you scale it down.
I printed it at 26% scale for size in the photo. I would recommend a higher infill, like 30%, so the balls have more support when its printing, but it will work at 15% infill. the base of the balls will be a bit jank.
There is also a side where the balls are flat. You should use this as the base of the print. No supports.
Use a pen tip to push each ball free, and use a drill to run the bearing in. I wrapped the end of the drill with tape to protect the bearing. (no drill bit of course). Good luck