Vertical notebook/laptop stand

Vertical notebook/laptop stand originally designed for a notebook with a keyboard thickness of approx. 1.3 cm. The laptop shown in the picture is a Lenovo (original design was based on an Asus VivoBook 14 Flip, 14").

The model can be easily upscaled or downscaled to fit any laptop thickness.

Scaling calculation (rule of three):
If 1.3 cm corresponds to 100% scale, then:

y = (x * 100) / 1.3

where:
x = thickness of your laptop in cm
y = resulting scale in %

This allows you to proportionally adjust the model for any device thickness.

It is designed to hold the laptop in an open vertical position to improve body posture while working. I do not recommend using the laptop keyboard while using the stand, rather use an external keyboard.

The stand itself is stable and firm depending on infill; I used 15% infill, but I recommend 20% or more. For better stability, rubber pads can be added.

I would appreciate any kind of feedback. And if you would be interested in a stand with other parameters, let me know.

infill: 20% or more
infill pattern: gyroid

wall line count: 2
wall line width: 0.45
layer height: 0.28 mm

supports: tree