Vertical notebook/laptop stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vertical notebook/laptop stand designed for notebooks with a keyboard thickness of aprox. 1.3 cm.
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 133
- Makes
- 1
- Views
- 777
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Vertical notebook/laptop stand originally designed for a notebook with a keyboard thickness of approx. 1.3 cm. The laptop shown in the picture is a Lenovo (original design was based on an Asus VivoBook 14 Flip, 14").
The model can be easily upscaled or downscaled to fit any laptop thickness.
Scaling calculation (rule of three):
If 1.3 cm corresponds to 100% scale, then:
y = (x * 100) / 1.3
where:
x = thickness of your laptop in cm
y = resulting scale in %
This allows you to proportionally adjust the model for any device thickness.
It is designed to hold the laptop in an open vertical position to improve body posture while working. I do not recommend using the laptop keyboard while using the stand, rather use an external keyboard.
The stand itself is stable and firm depending on infill; I used 15% infill, but I recommend 20% or more. For better stability, rubber pads can be added.
I would appreciate any kind of feedback. And if you would be interested in a stand with other parameters, let me know.
infill: 20% or more
infill pattern: gyroid
wall line count: 2
wall line width: 0.45
layer height: 0.28 mm
supports: tree