1 / 4
Honda Motocompacto Tail Light Cover Silhouette (Various styles), Press Fit — zdjęcie 1
1 / 4

Honda Motocompacto Tail Light Cover Silhouette (Various styles), Press Fit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made some taillight silhouette covers with the design input of the Motocompacto community

Ocena
0 / 5
Polubienia
4
Pobrania
61
Wydruki
0
Wyświetlenia
472
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Another item added to the list of free stuff that you can 3D print for your scootcase.  Print with the visible part against the bed.  EZPZ. I know I said “press fit” but if you really want this secured in place, a bit of double-stick tape around the inside of the rim would help.  If I lose one I'll just make another so I'm not going to bother. 

The Honda “H” logo and Honda wing logo are somewhat difficult.  I made the “H” logo to print like all the other covers, but you have to first fill the logo with clear resin of some sort then cut off the two upside-down “V” shapes to suspend the “H” in the center of the logo AFTER the resin is cured.  I didn't figure out how to do the Honda Wing logo with the text, but I laid it out in Freecad and included the file.

Big thanks to the Motocompacto subreddit for input on what they like to see on their Compactos!  

Tagi