1 / 3
Articulating Raspberry Pi Camera Mount mod for Prusa Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Subset of modified parts from great Raspi Camera mount to fit it in Prusa enclosure
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
Remix of the great Raspi Camera mount to fit it inside of the Prusa enclosure with 4 spools mounted.
Parts are redesigned to match perfectly Standers M5 20mm hex cap screws and nuts that I found in hardware store. If your screws doesn't match, feel free to use provided step files to easily modify the printed parts.
Printed part list:
- 6x Bolt
- 6x Spacer (used to pad the space between screws and MF links holes)
- 5x Nut
- 1x Ball Nut
- 1x Enclosure side mount
- 5x MF link 90 support by Sneaks
- 1x Gblock v2 by Sneaks
- 1x Raspi cam back by Sneaks
- 1x RasPi Camera V3 Module Cover by DocWeebl if you are using v3 module
(There are also 3mf files provided with all parts prepared)
Hardware list:
- 6x M5 20mm hex cap screws
- 6x M5 hex nuts
- 2x M3 8mm black hex cap screws (from enclosure kit)
- 2x M3 hex nuts
- Raspi v3 camera
- FlatFlexCable for Raspi camera (15 contact, 1mm pitch) >35cm, preferably longer
(35 cm is length from camera to the cable hole in enclosure)