1 / 3
Articulating Raspberry Pi Camera Mount mod for Prusa Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Subset of modified parts from great Raspi Camera mount to fit it in Prusa enclosure
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of the great Raspi Camera mount to fit it inside of the Prusa enclosure with 4 spools mounted.
Parts are redesigned to match perfectly Standers M5 20mm hex cap screws and nuts that I found in hardware store. If your screws doesn't match, feel free to use provided step files to easily modify the printed parts.
Printed part list:
- 6x Bolt
- 6x Spacer (used to pad the space between screws and MF links holes)
- 5x Nut
- 1x Ball Nut
- 1x Enclosure side mount
- 5x MF link 90 support by Sneaks
- 1x Gblock v2 by Sneaks
- 1x Raspi cam back by Sneaks
- 1x RasPi Camera V3 Module Cover by DocWeebl if you are using v3 module
(There are also 3mf files provided with all parts prepared)
Hardware list:
- 6x M5 20mm hex cap screws
- 6x M5 hex nuts
- 2x M3 8mm black hex cap screws (from enclosure kit)
- 2x M3 hex nuts
- Raspi v3 camera
- FlatFlexCable for Raspi camera (15 contact, 1mm pitch) >35cm, preferably longer
(35 cm is length from camera to the cable hole in enclosure)