Lampshade - Single Extruder - Dual Color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
One outer lampshade and one inner. Combine Colors of your choice
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed with 0.2 layer height
The model files are in print position, no need to rotate
For the inner lampshade I have used both inner and outer brim. Inner brim should be enough but for the MK4/S that does not work but both will. Maybe brim isn't necessary.
The inner lampshade interconnects with the outer.
Choose your colors … when the light is turned on it will maybe be quite different than you thought!
And … why yellow and black … well .. the yellow filament ran out, so I had to use something else, and it ended up being black
But here it is - Single Extruder - Dual Color
Print the parts
Assemble
Three different lamp plugs with cords from IKEA.
Either
Requires no adaptor
https://www.ikea.com/se/sv/p/hemma-upphaeng-vit-10386577/
https://www.ikea.com/se/sv/p/hemma-upphaeng-svart-40386590/
or (requires the blue adaptor above, see 3MF and/or STL)
https://www.ikea.com/se/sv/p/strala-sladdstaell-vit-20366404/
or (requires the adaptor to the right)
https://www.ikea.com/se/en/p/skaftet-table-lamp-base-nickel-plated-40404103/
The adaptor to the right:
https://www.printables.com/model/831892-lampshade-mount-for-ikea-skaftet-table-lamp-base
