Lampshade - Single Extruder - Dual Color
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One outer lampshade and one inner. Combine Colors of your choice
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 15
- Makes
- 0
- Views
- 208
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Printed with 0.2 layer height
The model files are in print position, no need to rotate
For the inner lampshade I have used both inner and outer brim. Inner brim should be enough but for the MK4/S that does not work but both will. Maybe brim isn't necessary.
The inner lampshade interconnects with the outer.
Choose your colors … when the light is turned on it will maybe be quite different than you thought!
And … why yellow and black … well .. the yellow filament ran out, so I had to use something else, and it ended up being black
But here it is - Single Extruder - Dual Color
Print the parts
Assemble
Three different lamp plugs with cords from IKEA.
Either
Requires no adaptor
https://www.ikea.com/se/sv/p/hemma-upphaeng-vit-10386577/
https://www.ikea.com/se/sv/p/hemma-upphaeng-svart-40386590/
or (requires the blue adaptor above, see 3MF and/or STL)
https://www.ikea.com/se/sv/p/strala-sladdstaell-vit-20366404/
or (requires the adaptor to the right)
https://www.ikea.com/se/en/p/skaftet-table-lamp-base-nickel-plated-40404103/
The adaptor to the right:
https://www.printables.com/model/831892-lampshade-mount-for-ikea-skaftet-table-lamp-base
