1 / 8
Deckel Fp1 bed slot covers and slot cleaner. — zdjęcie 1
1 / 8

Deckel Fp1 bed slot covers and slot cleaner.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Deckel Fp1 bed slot covers and slot cleaner.

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
121
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution

Deckel Fp1 bed slot covers and slot cleaner.

Printed in Tpu95a

Chips go everywhere, this is to help with cleanup.

I use the slot cleaner with the bottom of a brush as shown.

Will need to print with supports, tpu is not so good at support. Careful when trimming the end piece to make it fit. Fitment is not critical.

The bed is 600mm in width - I do not have a printer that size, so have various sizes to make up the length. This hopefully will cater for the vise theoretically in the middle where you just add on from the vise side.

Print quality is not an issue - hot chips, abrasive cleaning action.

 

12/10/2024    Added a z axis 'scraper' - If you don't have a z axis way cover - remove the 2 screws holding the plate down and check your bakelite blocks - its possible chips may be stuck there. Hopefully this may help prevent that.

 

09/12/2024  Added a vacuum cleaner nozzle for cleaning out the slots - od is 33mm.  Easy to change the step file for different widths.