1 / 8
Deckel Fp1 bed slot covers and slot cleaner. — image 1
1 / 8

Deckel Fp1 bed slot covers and slot cleaner.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Deckel Fp1 bed slot covers and slot cleaner.

Rating
0 / 5
Likes
3
Downloads
16
Makes
0
Views
121
Reviews
0

Updated at source:

Model information

Category
Engineering
License
Creative Commons — Attribution

Deckel Fp1 bed slot covers and slot cleaner.

Printed in Tpu95a

Chips go everywhere, this is to help with cleanup.

I use the slot cleaner with the bottom of a brush as shown.

Will need to print with supports, tpu is not so good at support. Careful when trimming the end piece to make it fit. Fitment is not critical.

The bed is 600mm in width - I do not have a printer that size, so have various sizes to make up the length. This hopefully will cater for the vise theoretically in the middle where you just add on from the vise side.

Print quality is not an issue - hot chips, abrasive cleaning action.

 

12/10/2024    Added a z axis 'scraper' - If you don't have a z axis way cover - remove the 2 screws holding the plate down and check your bakelite blocks - its possible chips may be stuck there. Hopefully this may help prevent that.

 

09/12/2024  Added a vacuum cleaner nozzle for cleaning out the slots - od is 33mm.  Easy to change the step file for different widths.