Rotary Blade Buffing Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
45 mm Rotary Blade Buffing Jig Regular buffing, especially with a quality blade, will help extend its lifespan.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
45 mm Rotary Blade Buffing Jig
To make this jig, you'll need the 3D-printed parts, green buffing compound, a small piece of leather, and glue to attach the leather to the 3D-printed part.
Use the "LeatherHolder" piece as a template to mark and cut the leather to the correct size. It’s recommended to use a thicker piece of leather to reduce the chance of the blade cutting into the printed part. Once the leather is cut, glue it to the 3D-printed part and rub some green buffing compound onto the leather.
Install the blade into the parts containing screw threads and rub the blade against the leather.
Regular buffing, especially with a quality blade, will help extend its lifespan.
The parts s.hown in the picture were printed with PETG, but PLA should work just fine as well.
If you need further assistance can see my buffing clip on my instagram @yui_maker.