Qidi Q1 Pro Filament Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a filament cutter for the Qidi Q1 Pro
- Ocena
- 5 / 5
- Polubienia
- 177
- Pobrania
- 843
- Wydruki
- 8
- Wyświetlenia
- 8059
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
Unclip drag chain and remove bowden tube. Slide cutter under the drag chain slip over drag chain mount and insert bottom of cutter into bowden hole on print head. Reinstall drag chain and insert bowden tube into top of cutter. Push filament into extruder then proceed with load procedure on printer. Your able to remove print head cover without removing cutter by slightly lifting as normal until cover comes off. Will need 1 small spring and a #11 exacto blade. Print with supports. I printed with 5 walls but 3 should be fine. Cutter arm can be printed 2 ways. As a 2 piece. Insert blade after print. Recommend gluing pieces together. As a 1 piece. Insert pause at layer 32 in slicer. When printer pauses, insert blade. Resume print.
link for activator arm and gcode.
https://www.printables.com/model/1024536-qidi-q1-pro-filament-cutter-activator