Qidi Q1 Pro Filament Cutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a filament cutter for the Qidi Q1 Pro
- Rating
- 5 / 5
- Likes
- 177
- Downloads
- 843
- Makes
- 8
- Views
- 8,059
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v2.0
Unclip drag chain and remove bowden tube. Slide cutter under the drag chain slip over drag chain mount and insert bottom of cutter into bowden hole on print head. Reinstall drag chain and insert bowden tube into top of cutter. Push filament into extruder then proceed with load procedure on printer. Your able to remove print head cover without removing cutter by slightly lifting as normal until cover comes off. Will need 1 small spring and a #11 exacto blade. Print with supports. I printed with 5 walls but 3 should be fine. Cutter arm can be printed 2 ways. As a 2 piece. Insert blade after print. Recommend gluing pieces together. As a 1 piece. Insert pause at layer 32 in slicer. When printer pauses, insert blade. Resume print.
link for activator arm and gcode.
https://www.printables.com/model/1024536-qidi-q1-pro-filament-cutter-activator