Adapter for miter saw dust port.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for vacuum cleaner hose for miter saw dust port.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Adapter for vacuum cleaner hose for miter saw dust port.
Adapter for ZUBR Professional miter saw dust port, d 305 x 30 mm, 2000 W PPT-305-P.
Using a vacuum cleaner instead of the standard miter saw dust bag dramatically reduces the amount of dust in the air and in the space around the saw.
The dust port of the ZUBR Professional miter saw, d 305 x 30 mm, 2000 W PPT-305-P has a large connector, which makes it impossible to connect the vacuum cleaner hose directly to the dust port.
In addition, due to the design features of the saw, it is impossible to put on a conical adapter without a special recess.
The nested adapter model is put on the dust port of the miter saw and allows the use of the Bosch Professional 25 vacuum cleaner to extract wood dust generated during cutting.
Vertical printing along the main axis of the cone, with a wide opening on the printing table.
Printing with a 0.4 mm nozzle, 0.2 mm layer, 3 meshes, 15% filling, PLA filament, thin tree-like support for a recess inside the adapter.