1 / 5
Bosh Vacuum BCH3P2301 adapter to Ruhhy vacuum bags — zdjęcie 1
1 / 5

Bosh Vacuum BCH3P2301 adapter to Ruhhy vacuum bags

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter for Bosh stick vacuum cleaner BCH3P2301 that fits on the valve of the Ruhhy vacuum bags.

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
139
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is an adapter you can screw on the Ruhhy vacuum bag and clip the Bosh stick vacuum (the handheld part) to it to suck the air out of the bag.

I printed with PLA and it works fine, but you need to be extra careful when removing supports around the clip button. I would have used more flexible filament like PETG if I had any at home. I would try suppressing the supports on the top clip button arc. The printer might be able to print the arc without the support but I haven't tested it.

I would reccommend to suppress as much support comming from the inside of the walls as possible, if your slicer places them there. Because they are not necessary and they don't come out easily.

Tagi