Altrex ladder feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet for a ladder
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
Needed some feet for my old Altrex aluminium ladder. The old rubber feet where long gone. I printed mine in PLA with 5 perimeters.
Be aware! Depending on the surface the ladder is placed on, plastic feet may be very slippery!
Print with some more rubber like material if you are using your ladder on harder surfaces!
I took a picture of the aluminium extrusion at the end of the ladder, imported it to Fusion and started modeling. Turned out really good first try. It's a snug fit on my ladder (I needed a rubber mallet to get them on) so I didn't need the holes for any attachment.
Feel free to modify in Fusion or using the STEP file.