Universal Sign (add optional magnet and/or NFC-tag AFTER print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An universal sign/label for your whole household. Magnetic, used with stand or even fixated with cable ties.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the last sign, you will ever need for your organization!!!
Features
- universal - use it with a magnet, with the included stand or using cable ties.
- economical - minimal use of filament. Each sign needs less than 6 grams of filament.
- reusable - add or remove it from the cover or the stand, add or remove an NFC-tag or a magnet, whenever you want.
- versatile - use a pen, a label printer with bands of a maximum height of 36mm or even printable labels with the dimensions of 63.5x29.6mm to add text or graphics on the sign.
- ease-of-use - added tool to easily add or remove magnets after the print. No need to add magnets while printing.
Instructions
Print Settings
Print with a layer height of 0.2mm. PETG ist recommended but PLA should also be a good choice (not tested).
Add a magnet
There's no need to add the magnet while printing. You can add a 10x2mm circular magnet made out of neodym whenever you want using the Magnet Positioning Tool. The sign itself is designed to hold the magnet firmly in place.
Remove a magnet
No need to destroy your print to get the magnet back. Just use the Magnet Positioning Tool to push it out of the printed sign.
Fixating the sign using cable ties
There are four holes to fixate the sign using zip ties. Just use two of them to hold the sign firmly in place. Optionally use the Backplate to get a better look. Just push sign and backplate firmly together.
If you are not using cable ties, you might want to fill the holes using the Cable Tie Hole Blockers to prevent bugs to get into the sign. Just add them as seen below.
Add a RFID/NFC-Tag
In the back you will find place to add a self-adhesive 25mm circular RFID/NFC-Tag. If using a tag and a magnet together, the magnet will not interfere the readability of the tag.
Using the stand
Included is a stand with 60 degrees rotation. Just print sign and stand and push them firmly together.
Labeling the sign
You can use a permanent marker, printable self adhesive labels or even 12 or 24mm labels using a label printer to add text or graphics to your sign.
