20 Magnet Dayan Tengyun Ball Core
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 20 magnet ball core compatible with the Dayan Tengyun's core
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 138
- Wydruki
- 0
- Wyświetlenia
- 653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Public Domain
I made this for my Super RS3M v2, but the STLs are fitted for a Dayan Tengyun's core as I had a spare one laying around. These are compatible with any magnets sized 3x2mm and I personally used N50s for mines. I printed this with resin rather than FDM as the resin printer lets me get more strict with tolerance, it needs less support, and the lower strength as well as the higher friction surface of the part because of the resin was not a real concern for this project. I used an anycubic photon mono 4k for this with standard anycubic gray resin.