1 / 2
20 Magnet Dayan Tengyun Ball Core
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 20 magnet ball core compatible with the Dayan Tengyun's core
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 165
- Makes
- 0
- Views
- 713
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Public Domain
I made this for my Super RS3M v2, but the STLs are fitted for a Dayan Tengyun's core as I had a spare one laying around. These are compatible with any magnets sized 3x2mm and I personally used N50s for mines. I printed this with resin rather than FDM as the resin printer lets me get more strict with tolerance, it needs less support, and the lower strength as well as the higher friction surface of the part because of the resin was not a real concern for this project. I used an anycubic photon mono 4k for this with standard anycubic gray resin.