1 / 4
Transceiver SParrow 4" stable legs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stable legs of the TRX SParrow that prevent it from tipping backward.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
TRX SParrow 4" with original legs tips backward very easily. More stable stands that prevent that.
Original legs also mounted (so they won't get lost).
Printed from PETG (no supports). Original screws were used. 4x 20x20mm self-adhesive furniture pads on bottom. Print second one mirrored in slicer.
Step and Fusion files are available.
Note:
Do not buy Sparrow 4 because:
- you will end up with device that's basically unsupported by seller or anyone else
- seller won't fulfill license related to design (won't provide you with schematics, gerber files, pcb design etc)
- seller won't fulfill GPL license related to firmware (won't provide you with buildable (or any other form of) source code of sparrow firmware)
- you won't get fiscal document for a transaction
- sadly this is real, google more about device or seller
If you like playing with random hardware then Sparrow 4 is a good piece for you. Otherwise - stay away from it and don't waste your money.