P
Printables
Traction Board for Traxxas TRX4
Add these decorative traction boards to your Traxxas TRX4 rig for some instant credibility. Look great printed in orange, but could be really cool in red too.
Wyniki wyszukiwania: trx
Liczymy pasujące modele…
P
Printables
Gas cans for Traxxas TRX4
Add these gas cans to your Traxxas TRX4 rig to instantly look 10% more rugged and legit. Could print one in red for gas, and another in yellow for diesel, whatever fuel your rig runs on…
P
Printables
Rear ladder for TRX-4M Defender
Hello. Here I present the rear ladder for the Defender. It is mounted in place of a spare tire with a screw. Additionally it "clips” on the roof frame. It got a holder for a fire extinguisher which is held by a zip tie. sdg
P
Printables
Traxxis TRX4 Hitch
This model is made for small toy trailers that have a hook. I used ¼" metal hitch pins to secure it to the truck. I've uploaded the step file if you want to design your own hitch pin or make any other changes. Thanks for downloading.
P
Printables
TRX4m Trailer spare tire mount/rear bumper.
Made for two spare tires. just pops into the holes. Easy to print. ENJOY! MRC.
P
Printables
WORK IN PROGRESS: TRX4m K5 Blazer body
This is a work in progress, just posting a preliminary version to gauge interest. If you desire to work on it from the point that I have it, you are more than welcome to. Some details for those who would like this project: This is…
P
Printables
Traxxas TRX4 front and rear bumpers for Jeep or offroad body
Bolts into stock Traxxas TRX4 frame, obviously not a functional spare, makes it look more like a Jeep. I printed them in black PLA and they hold up fairly well.
P
Printables
K6ARK/N7TRX Mini Mic
Adam’s (K6ARK) Mini Microphone is the gold standard for ultralight portable radio setups. This slimmed down remix reduces weight and refines some features. Differences of the remixed enclosure compared to the original: Improved front to…
P
Printables
N7TRX Ultralight QMX Case
This redesigned QMX case focuses on maximum weight reduction and rigidity, offering a 33% weight saving over the original aluminum housing and knobs. Assembly Hardware Screws: All versions require M3-0.5 x 10mm black nylon flat head…
P
Printables
TRX-4M All-Terrain Wheel
Trx4m all-terrain wheel lets you grip at any loose surface like snow, gravel, dirt, small rocks, and mud. Each little spike is approximately 13mm tall, so you have some fender clearance. UPDATE: Ski wheel. ONLY FOR FRONT WHEELS!!!…
P
Printables
NEW! TRX4M TRAILER FLAT BED MOD now with ramps and improved deck
i printed with pla+ and with the ramp facing up
P
Printables
MHST track TRX4 Anti-rotation bracket
A rework of the TRX4 anti rotation brackets, this mod adds extra cutouts and chamfers for the TRX4 aluminum portal outers, and rotates the front cover to account for the TRX4's caster angle so the front teacks sit flat. Each bracket has a…
P
Printables
Body Mounts for 1/10 Toyota Comp Body on Traxxas TRX4
These are designed to fit the 1/10 Toyota Comp Crawler Body by jasonboz56 on MakerWorld ( 1/10 Toyota comp Crawler body - Free 3D Print Model - MakerWorld ) to the Traxxas TRX4 chassis. These parts replace the original bumper mounts on…
P
Printables
Mathews TRX 36 insert
Simple insert for Mathews TRX 36 bow, inspired by some others I saw for the TRX 38 but could find anything for the TRX 36. Printed in TPU so it's a full push through piece so it's nice and secure, I'm pretty new to 3d printing but printed…
P
Printables
TRX-4 Defender Sandboard w/ Holder
TRX-4 Defender Sandboard w/ Holder to the Rollcage Remix of these two together: Sandboard: https://www.thingiverse.com/thing:4844876 Holder: https://www.thingiverse.com/thing:3278360 will post better pictures soon
P
Printables
trx4m high trail rock sliders
these are a remix of the trx4m inner fenders so you can mount your esc or receive onto it
P
Printables
trx4m high trail weight box
this model is made for a trx4m high trail if you want to sled pull or just need weight on the front of your truck or you think it looks cool (if you want a bronco/defender one leave a comment i'll make one)
P
Printables
Temporary wheel for trx4, scx10 and other rc cars
Temporary wheel for RC models with an outer diameter of 107 mm, designed for safe storage of the vehicle. The rim is made of PLA/PETG, and the tire is made of TPU. Features a standard 12 mm hex mount, ensuring compatibility with most RC…
P
Printables
Cup like side mirrors for TRX-4M Chevrolet
I constantly lost my side mirrors from my TRX-4M Chevrolet. The original one are beutiful, but extremely fragile. This design is close to cup like look. Same size, but much more mterial. Mounted using original holes and M2 screws (I used…
P
Printables
Sparewheel mount for TRX4M Trailer
This is the simple sparewheel mount for 7mm hex wheel (trx4m standard), that mounts into front sidewalls openings on the trailer. Wheel is secured by 2,5mm screw (as original trx-4m rear sparewheel) S.D.G.
P
Printables
TRX-4M Body Risers
These Trx 4m body risers allow larger tires to avoid body rub without jacking up the suspension. Since bumpers are the body mounts, the bumpers are still aligned with the body. The rear bumper needs some modification to get working,…
P
Printables
TRX4M Modular Track Part 3: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4M Modular Track Part 5: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4M Modular Track Part 6: SCX24 Customizable
Customize your track to fit your vehicles track width.
P
Printables
TRX4M Modular Track Part 10: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4M Modular Track Part 11: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4M Modular Track Part 12: SCX24 Customizable
Took the amazing design from Ed and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people wouldn't have to reprint track pieces if they…
P
Printables
TRX4m Modular Track Part 11.A SCX24
Took the amazing design from Ed which was then remixed by Dieter Spillmann and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people…
P
Printables
TRX4M modular track SCX24
Took the amazing design from Ed which was then remixed by RJ Patawaran and added some variations. I just got a SCX24 and the original track width with the stock SCX24 is super close. I was hoping to figure out a solution so people…
P
Printables
Windshield wipers for TRX4M Defender
What you see here is a set of windshield wipers with a license plate carrier meant for Trx TRX-4M Defender. These just clip onto the windshield frame. With this design there are more nails hit - wipers are 1 model, easier to print and…
P
Printables
TRX4 Defender Alternative spare wheel mount with ladder
Recommend to use supports and 100% infill on ladder part. Need M3 screw for mounting the spare tire. For mountin in chassis using just existing holes/screws from orignal mount.
P
Printables
UPGRADE SET for Traxxas TRX-4M incl. trailer body & cage, stands, starting aid and more
This voluminous UPGRADE SET for your Traxxas TRX-4M and its trailer (#TRX9795) includes the following: (Please have a look at ALL pics to get an overview!) CASE BODY WITH SLIDING DOOR Slip-on trailer case body with sliding door for the…
P
Printables
Honda TRX400EX 400X VIN Restoration Jig - Punch Alignment Tool
This is a 3D printed jig to align letter punches on the front of the 400EX frame. This jig slaps down on the VIN plate and bolts through the bumper mounting holes. This is a beauty in case the sandblasting shop got WAY too aggressive on…
P
Printables
TRX 700XX Fender Repair
This is to repair a common weak spot on the fenders of a Honda TRX700XX ATV. This is made to replace the rubber bushing. Simply remove the 10mm screw, remove the rubber bushing, slide on the repair piece, then make holes in the residual…
P
Printables
Traction Board for Traxxas TRX4
Add these decorative traction boards to your Traxxas TRX4 rig for some instant credibility. Look great printed in orange, but could be really cool in red too.
P
Printables
Gas cans for Traxxas TRX4
Add these gas cans to your Traxxas TRX4 rig to instantly look 10% more rugged and legit. Could print one in red for gas, and another in yellow for diesel, whatever fuel your rig runs on…
P
Printables
Trx4m wall bracket
This is a wall bracket for Trx4m. The screws used are 4x30mm with countersunk head. Happy printing
P
Printables
Rear ladder for TRX-4M Defender
Hello. Here I present the rear ladder for the Defender. It is mounted in place of a spare tire with a screw. Additionally it "clips” on the roof frame. It got a holder for a fire extinguisher which is held by a zip tie. sdg
P
Printables
TRX-4M Bronco Stinger Bumper
I wanted a high clearance bumper for my TRX-4M Bronco but still wanted it to look like a real one. I made a remix from Jraaadd's high clearance bumper, https://www.thingiverse.com/thing:5960218 and Anthem17 TRX4M Bumper with ram bar…
P
Printables
TRX-4M Front Shock Mounts
I designed this shock mount for the Trx4m. I mainly made these to have more clearance over rocky terrain and to jack it up. They do not only make the car look cool but gives you the articulation you want for crawling! This is a Remix of…
P
Printables
TRX-4M Front Shock Mounts V2.5
This is the V2.5 of my other mounts. I designed this shock mount for the Trx4m Bronco. I mainly made these to have more clearance over rocky terrain and to jack it up. They do not only make the car look cool but gives you the articulation…
P
Printables
Traxxas trx4 pinion gears
NOTICE!!! print in a strong filament like PETG,ABS or ASA. You can try PLA but I havent tested it yet and remember it is plastic not metal so be careful! if you have feedback please let me know and please tell me if you want the 39teeth…
P
Printables
Traxxas TRX4 rear flush bumper
replace the TRX4 bumper mount, locate the bumper more close to the body, use rear or front with aftermarket body. you can also install it in both directions, use stock screw, it can also with bumper that use round mount to the chassis. it…
P
Printables
TRX4 EWA A106 PRO Speaker holder for subwoofer
this is a holder for EWA A106 PRO so you can fit the micro speaker in a TRX4. please see my video on how:
P
Printables
Injora Brushless System Platform for TRX-4M
About: I made this platform to hold Injora's new brushless system. This makes it neat and tidy. I put pieces of velcro on the platform to attach the ESC and power button on it. Simple Intallation: To install on your TRX-4M just slide it…
P
Printables
MSI TRX40 PRO WiFi Motherboard Backplate IO Shield
Backplate / IO-Shield for MSI TRX40 PRO WiFi Motherboard
P
Printables
Traxxas TRX-4M Trailer Rails
1/18 Scale 2x6 trailer side rails for the Traxxas TRX-4M (TRX4M) trailer. Rails slip into the post holes on the trailer. Print two ends and two sides for a full set.
P
Printables
TRX4M Chevrolet K10 mirrors
Replacement for original mirrors. Less beauty, less money, more stiffnes. Náhrada za originální zrcátka. Ne tak hezká, ale odolnější a řádově levnější.
P
Printables
TRX-4 Servo Mount 5mm Down
Made to replace the original to allow more lift of the car. You may need this Part for the panhard link: https://www.printables.com/model/1082050-trx-4-panhard-link-set-down
P
Printables
TRX-4 Panhard Link Set Down
Can be installed to lower the Panhard Link from the chassis to allow more lift. Both Versions do work but V3 is more stable and doesn't flex as much and allows therefore for a stronger Servo. Works with this Part for lower Servo mounting:…
P
Printables
TRX4M LANDCRUISER 250 SERIES OVERLAND TRUCK CONCEPT
requires your own mounting system but that's it!
P
Printables
Traxxas TRX4-sport rear bumper
I built my own trx4 (chassis kit) and that trx4 back bumper was not compatible with a sport body so I designed my own competition bumper. And it works great the only thing is that you must just insert it well when putting on the body. I…
P
Printables
Skeeride Snowtracks for TRX-4
I wanted some tracks for my TRX-4, I have tried the official Traxxas ones and i was disappointed by their performances in the snow. I had built a Skeeride 2 From BuildItBetter and the track on this little sled works so great, I wanted to…
P
Printables
TRX4M Trailer
Trailer for Traxxas TRX4M RC model. Must be supplemented with original accessories: - TRA9796 - Traxxas Trailer Parts - TRA9753 - Traxxas wheel shaft - TRA9745 - Traxxas sliding bearings - TRA9774 - Traxxas wheel Of course, other parts…
P
Printables
Traxxas TRX-4 transmission shift servo mounting bracket
I wanted to mount everything between the frame rails to keep the truck narrow for competition crawling, so this is just a simple bracket to mount the transmission shift servo in a better location. The metal rod that hooks to the…
P
Printables
Traxxas TRX-4 body post adapter
I made this body post adapter in order to use an old HPI Jeep Wrangler body which I had from my old E-Maxx. It utilises a rear body post from the old style E-Maxx/ T-maxx trucks which had the round body posts, not the later type with the…
P
Printables
Traxxis TRX4 Hitch
This model is made for small toy trailers that have a hook. I used ¼" metal hitch pins to secure it to the truck. I've uploaded the step file if you want to design your own hitch pin or make any other changes. Thanks for downloading.
P
Printables
RC Car Stand (TRX4M)
Motivation My brother wanted to have a stand for his TRX4M RC car manufactured by Traxxas. There are some stands for this platform out there which do the job as well and use very little filament: TRX4m Stand & Shock Stand by MDrexAMG or…
P
Printables
TRX4 Performer Bumper
Dies ist ein Bumper für meinen TRX4 Performer mit Jconcept Creep Karosserie
P
Printables
TRX4M Modular track Pt 1 Remix: Slope w/ rollers
You can configure it the way you need it to match your vehicle's wheelbase using either a roller or the fixed cover for each of the 14 slots.
P
Printables
TRX4 1/10 Landrover Defender Steelies discs
1/10 replica of original Landrover steelies discs for TRX4 1/10 Defender. You need five M2.5x12 imbus bolts + five M2.5 nuts for each. Printed with PLA with supports 100% infill. It survive whole year from hot summer into freezing snow…
P
Printables
TRX4 Bumper holder
Shock absorbing bumper holder for Traxxas TRX4 Defender with Injora rock crawler bumper: https://www.injora.com/products/adjustable-metal-front-bumper-for-1-10-rc-rock-crawler My car is pretty heavy ~ 4.5kg and just light front crash…
P
Printables
TRX4 Door rim protector
For Traxxas TRX4 Defender. Protect the bottom edge of body which suffer during crashes. Protector is attached by bottom fender bolts. Compatible with Injora Metal Pedal Rocks Sliders:…
P
Printables
Traxxas TRX-4m wall mount
Simple wall mount for TRX-4m with hook for the transmitter. You will need 2 Screws with Ø3mm or Ø3,5mm to attach the wall mount at the wall. You can print this part without support when you print it at a angle of 45°. Category: R/C Vehicles
P
Printables
Phone Holder Star Trac 8TRX/8TR Treadmill
Phone Holder for Star Trac 8TRX and 8TR Treadmill
P
Printables
RC TRX4 Mercedes G400 500 Rooftop
Rooftop including holder for Traxxas TRX G400/500 RC car scale 1:10 designed by Kjelgaard. Notice files V2 is made for Number plates in front instead of text. Also holder has been changed for easier access to bodyclips. The design also…
P
Printables
Podlaha Chevrolet TRX-4m
Vytiskl jsem si tuto podlahu pro Traxxas TRX-4m, abych mohl přilepit náklad a nezničil originální podlahu. Tiskl jsem z PLA wood, první vrsta 0,3. Ostatní vrstvy 0,2, Všechny parametry jsou volitelné.
P
Printables
Traxxas NITRO TRX .15/2.5 intake
Custom TPU intake for traxxas nitros! utilizes the original cylindrical foam inserts for the .15/2.5 engines. the longer runner improves air velocity and structuring before mixing with fuel. performs BEAUTIFULLY on ported .15s. tested on…
P
Printables
TRX4M TRAILER OVERLAND RACK EASY FIT!
this is a overland rack for the trx4m trailer. fits very tight to the point you can't pull it out so I would file the posts slightly so it slides into the holes easily. Requires no hardware just pops into the existing holes on the…
P
Printables
Parcour Barrel for 1:10 Crawler like Traxxas TRX-4 and others
This barrel has been designed as a guidance and/or obstacle on your crawler course and parcour. It can easily be stuck into the ground. I recommend to print in PETG with at least 3 wall lines or more. The modell is made with a spike for…
P
Printables
TRX4M Overland trailer build- Roof top tent shell pieces
I made the clear part out of a quart size freezer bag with clear tape and glue holding it together. The bed is optional but makes it feel more real and that is made out of felt the is stapled together. going to need a strap to hold it…
P
Printables
TRX4m Trailer spare tire mount/rear bumper.
Made for two spare tires. just pops into the holes. Easy to print. ENJOY! MRC.
P
Printables
Trx4m Trailer overland trailer build ladder.
This ladder is a great feature to add to your overland build on the trailer. glue to side. ENJOY! MRC.
P
Printables
TRX4 Performer Bumper
Hier habe ich mal eine Stoßstange für meinen TRX4 Performer konstruiert mit Lichteinsätzen für Scheinwerfer. Die Stoßstange ist Zug um Zug gewachsen, i
P
Printables
Scale Calibration Weight Holder for use with Creedmoor TRX-925 Weights
This is a simple holder I designed to hold the three calibration weights used with a Creedmoor TRX-925 scale. The holder can be made out of just about any material.
P
Printables
Traxxas TRX4 sliders with bodymount and parts for pinched toyota crawler body
To fit the popular pinched toyota 1/10 body on Traxxas Trx4 chassie I made sliders with magnetic bodymounts, a battery holder( for example 3S 1300 mah) and a holder for the receiver box. Print with 6 walls, cubic infill 60%, enable…
P
Printables
Trak Racer TRX - Seat Fan
Print settings 15% infill 0.2mm SPEED Hatchbox PLA standard MK4 input shaping profile supports active everywhere with support blockers included in .3mf file. Printables (at settings above) 0000015_12_TRX_FrontPlateDriver 1hr18m, 19.25g…
P
Printables
Držák baterie TRX-4
Držák baterie do modelu TRX-4, nahrazující původní, v mém případě spojený s držákem externího napájení. Vše je vytisklé z PETG, žluté pružiny udržují baterii na místě, pro baterie 15-36mm vysoké. V modelech přidány i podpěry z PLA (tisk…
P
Printables
TRX-4 Assorted Slider Standoffs
I found an amazing design from chrismofer here ( https://www.thingiverse.com/thing:5358689 ) but the shims were a bit too high for my application as I'm using custom rock sliders, so I put the file in TinkerCAD and made some assorted…
P
Printables
Mercedes g wagon g63 6x6 for Scx24 or trx4m.
this model was a boxy looking 6x6 truck but LittleGuyMiniModels help me make it look great! I hope you think it looks great too! I will be releasing slowly a frame and other parts for the build too! The old version is the picture Thanks!…
P
Printables
Ikea Skadis Scx24/fcx24m/trx4m/ascent18/fcx18/fcx24 Holder
Designed for the Littleguyracingparts Super 8 axles, which means anything with an wheel to wheel of up to 13.5cm. Stock width is like 9.5cm. Works with stock axles, stock axles+hex extenders, Meus isos, Lgrp super 8s axles without hex…
P
Printables
TRX4m lcg frame
This one is designed for the bronco/defender style chassis. I will update later with the option to use it on a high trail later on. Assembly for the base frame is coded with colors: Yellow = M2.5 x 15mm, total 4 pieces Green = M2 x 8mm,…
P
Printables
Trx4 / Beluga Gopro / SJCAM C100+ mount
Camera mount for the front of the Beluga, or Trx4 Bronco. Very Sturdy, and uses existing mounting points that are there by the manufacturers for the fake winch on the bullbar. Uses the original spikes on the bullbar to go into the front,…
P
Printables
Battery tray for TRX4M
I needed a spare part so i did this and added some hexagon cutouts.
P
Printables
Trx4m (hightrail) easy hitch
(this creation may change or get additions in the future) One peeve I had about the original trailer hitch for my Trx4m was having to take the bumper off each time if I wanted to take it off so I decided that I would design a trailer…
P
Printables
Tubo escape TRX 4 Defender
Tubo es escape para sujetar en paracho original del TRX 4 Defender escala 1:10